repair dump file ews3

**bali motor** · 2nd August, 2009, 08:18 PM

hi, all

I have a problem with ews3, dump file ews3 damaged, how can be repair a file to virgin dump ews3

thank previous

regard
Komang

**bali motor** · 3rd August, 2009, 11:13 AM

hi,

How can I help to repair the file ews3, because he can not sincron with dme.

regard.

**vares** · 3rd August, 2009, 12:14 PM

Use DIS,Inpa,PAsoft for synchronization.

**bali motor** · 6th August, 2009, 03:27 PM

Originally Posted by vares

Use DIS,Inpa,PAsoft for synchronization.

hi, Vares
ews3 dump file is used. ews of the original damage.
I need to change the ews used, but can not be in synchron.
if you have a solution?

regard,

**vares** · 6th August, 2009, 07:22 PM

I think in your case, the easiest way to buy new preprogrammed EWS from the dealer for this car and make coding and synchronisation with DIS.
EWS is about 80 Euro.

**zrr_immo** · 6th August, 2009, 08:14 PM

try this file and programs... file is clear ..

**PremierD** · 7th August, 2009, 09:34 AM

Correct me if I'm wrong but .. If you Purchase a new EWS from the dealer it comes alresdy programmed for that vehicle ...And is just Plug and Go....?

**roby** · 7th August, 2009, 05:54 PM

Originally Posted by PremierD

Correct me if I'm wrong but .. If you Purchase a new EWS from the dealer it comes alresdy programmed for that vehicle ...And is just Plug and Go....?

Yes its programed but you still need to make EWS-DME/DDE aligment with DIS or other tools.

**jjrp255630** · 10th October, 2009, 03:07 PM

Originally Posted by roby

Yes its programed but you still need to make EWS-DME/DDE aligment with DIS or other tools.

hi people. is possible to eliminate the ews system? this way i would not have more problems with it.

regards

**atersdh** · 29th December, 2009, 05:44 PM

my ews3 was blocked when i read it it goes to ff ff ff .. but just the immo part from 0000 to 01f0 i need to know how to put it on blank or something to sincro whit ecu

**atersdh** · 29th December, 2009, 05:51 PM

i need this badly thanks u soo much

**jokersat** · 31st December, 2009, 06:49 PM

if you need immo off for BMW 320 E46 JUST ASK

**cjawahir** · 31st December, 2009, 07:27 PM

first if you have a used ews module and make key you vehicle should crank but not start , then you sync dme to ews , but later model like 1999 > cannot sync with used ews .

so something is not right with the chip or transponder ring or EWS module .

Jokersat can you tell me how to set immo off , do you have a dump , or something else ?

cj