GM MDI vehicle communication interface for wireless J2534 reprogramming

**Iteb** · 15th August, 2010, 09:55 AM

HI everyone.
I just thought to start a new thread for all of you who own, or are considering buying, a GM MDI, just to share experiences, as software, brand compatibility, tips and advice.
All information is appreciated.

Thanks guys

If my post has been helpfull please press the

tab

**londondiagnostcs** · 16th August, 2010, 12:04 PM

I have an MDI I find it very good on GM for SPS etc but find it very hit and miss with Techstream software. The mongoose cable is far superior for me.

I have read it works well with consult 3? Can anyon confirm this?

**Theo1606** · 16th August, 2010, 02:19 PM

Hi ... at Business i have install and test it with TisWeb Global for Opel ... it works wary good .... i have test it with the wlan option ... Top !!! Withe the Tech2 Emu you can use it as tech 2 for many Kfz ... opel gm Suzuki and other.

Sorry... but what is consul 3 ????

Sorry for my bad english :-(

**Iteb** · 16th August, 2010, 09:08 PM

Hi Theo1606, which MDI software version do you have?
Which Globaltis version?

Thanks in advance

**jihyu** · 17th August, 2010, 05:23 AM

Originally Posted by Theo1606

Sorry... but what is consul 3 ????

Sorry for my bad english :-(

The consul 3 is for nissan.

**Theo1606** · 17th August, 2010, 02:18 PM

Thanks ;-)

**Theo1606** · 17th August, 2010, 02:19 PM

I have the Last Version that i download from the garage before the admin make it new ... it is Version 22

**londondiagnostcs** · 17th August, 2010, 05:27 PM

I have found a couple of errors on Tech2win that are not on Tech2. When coding keys on a movano and a Corsa C I could not get it to work yet worked first time on Tech2.

MDI Tech2win is far from perfect these have been the only times I have needed it in last two weeks and I needed Tech2 to complete the Job.

I am not sure the Global version I am using as I have both a Saab and Opel Tis2web account.

**Wolfpack** · 18th August, 2010, 03:26 AM

I was going to buy a MDI but it only does 2 Gm models the Tech 2 can't cause of high speed can and it only about 22% faster in programming. maybe in a couple of years i'll get one but for now I'll keep using the tech2

**Iteb** · 18th August, 2010, 11:13 AM

Does anyone know if you can use the MDI for newer Hyundai, of course, with the right software?

Thanks.

**Theo1606** · 18th August, 2010, 03:02 PM

Originally Posted by Wolfpack

I was going to buy a MDI but it only does 2 Gm models the Tech 2 can't cause of high speed can and it only about 22% faster in programming. maybe in a couple of years i'll get one but for now I'll keep using the tech2

You can Programming older Opel to , i have make it with the Global Tis with a Old Corsa Combo ... work i have make it with Wlan.

**haussys** · 19th August, 2010, 12:35 AM

So J2534, can work with global tis on older car or with tech2 emulator.

Are you aware that we can not program new features in Astra J as we did in Astra H

**Theo1606** · 20th August, 2010, 01:18 PM

In the Software for the Midi ar only new Cars ... Corsa Insigna usw.

In the Globaltis you go to programming ... then the Car that u use ... and then you can change the Hardware in a Window , Tech2 , Tech2 with other option and the Midi .. it works , i have test it over Wlan.

**pecky** · 20th August, 2010, 04:26 PM

I have problems when connecting to an Astra CID display and it also will not do SPS pass through programming on the CIM, I think these issues are documented though.

**Iteb** · 20th August, 2010, 11:16 PM

Originally Posted by pecky

I have problems when connecting to an Astra CID display and it also will not do SPS pass through programming on the CIM, I think these issues are documented though.

Yes there are some issues, but them will be gone with the new mdi sw (it is written in the news-tab of tis2web):
hope so.

If my post has been helpfull please press the

tab