VCDS 10.6.0

[randomlog]

...with 908.1 too??

yes, with 908.1 and 912 are killed. (i supose that)

thanks to all

[bibkare]

yes, with 908.1 and 912 are killed. (i supose that)

thanks to all

Randomlog read these threads and you will find what you need for sure.
http://www.digital-kaos.co.uk/forums...ftware-156109/
http://www.digital-kaos.co.uk/forums...4-805-a-45071/
http://www.digital-kaos.co.uk/forums...rything-99750/

[randomlog]

Randomlog read these threads and you will find what you need for sure.
http://www.digital-kaos.co.uk/forums...ftware-156109/
http://www.digital-kaos.co.uk/forums...4-805-a-45071/
http://www.digital-kaos.co.uk/forums...rything-99750/

thanks bibkare.

Today i am doing testing of my 2 cables

Cable 1: vag 908.1 (get vagcom time out.)
Cable 2: vag 912. (now working )

I connected 12V to pin 8 of vag 912 and GND to pin 4 and 5 (pc source power - yellow for 12V and black for GND) and the leds has been power up (Red and green).

So, i did think about use MPROG for change some values to ftdibus.inf (driver file) vid: 0403 and pid: FA24.

Well i did an test in vag 912 and work OK.


Now, i going to test VAG 908.1 with the same procedure.

Vag com 908 gets TIME OUT message when i open vag 908.1/912, with 704.1 i get not pluggd into car.

Thanks to everybody for everything do it.


EDIT:

2 cables doesnt work ok, i can make the test ok (if the cable wants) but when i want check some module, i gets error msg.

[bibkare]

thanks bibkare.

Today i am doing testing of my 2 cables

Cable 1: vag 908.1 (get vagcom time out.)
Cable 2: vag 912. (now working )

I connected 12V to pin 8 of vag 912 and GND to pin 4 and 5 (pc source power - yellow for 12V and black for GND) and the leds has been power up (Red and green).

So, i did think about use MPROG for change some values to ftdibus.inf (driver file) vid: 0403 and pid: FA24.

Well i did an test in vag 912 and work OK.


Now, i going to test VAG 908.1 with the same procedure.

Vag com 908 gets TIME OUT message when i open vag 908.1/912, with 704.1 i get not pluggd into car.

Thanks to everybody for everything do it.


EDIT:

2 cables doesnt work ok, i can make the test ok (if the cable wants) but when i want check some module, i gets error msg.

Randomlog go here http://www.digital-kaos.co.uk/forums...ft232r-160237/