Hi fellas,
My itgate tgc210 is failing to boot up. The LED display is random.
Tried flashing noboot image using control center but no luck.
Can anyone help me here?
Thanks
Hi fellas,
My itgate tgc210 is failing to boot up. The LED display is random.
Tried flashing noboot image using control center but no luck.
Can anyone help me here?
Thanks
Have you tried a hard factory reset.
Turn box off, hold the up arrow on the box, turn box back on, on the on screen menu scroll down to factory reset, push right arrow to select factory reset on the box and that should reset your box to the default settings, i hope that helps.
wot version controll center you useing
Try the other one
Then noboot
Then your image ................Paul
If your Happy with the Help push the Thanx button
PAUL
Put box in serial mode and flash noboot V6 then uboot V6,I've uploaded them somewhere in here....twice.
Youll be back on track but on V6,then goto blue panel and flash on V8 or 7.9,your choice.
Thats the safest and most reliable way,try it on both control centres but the earliest release might be better.
Freck
Look here at post#6 by me
http://www.digital-kaos.co.uk/forums...porary-126453/
Last edited by freck; 3rd September, 2010 at 08:36 PM. Reason: addition to post
thank you guys for you suggestions.
but the box is not talking to me or the pc at all. nothing happens when i press the ch+ and on. any more advice ?
Wot happens when you attach the 232 with
Controll center it must pick the box up......Paul
If your Happy with the Help push the Thanx button
PAUL
hi all,
sorry couldn't get back to my itgate issue earlier on.. i have tried it again still the same.
I am using control center 2.5 and usb to serial connector to connect to the box.
please help i am with the box now now.
Bookmarks