MB STAR HARDWARE??

[grinich]

That is not dummy at all. Most likely your multiplexer is a good one too.

Until today I haven't had problems with it... I hope this continues...

Thanks DB_member

[flyer]

Hi
What about this site Ecartool Taiwan - STAR DIAGNOSIS

I purchased 6 c3 multiplexer ,the oldes on is from 2006 and still running .
You can use them on trucks too .

Cost 1000 eur without dilivery

[DB_member]

Hi
What about this site Ecartool Taiwan - STAR DIAGNOSIS

I purchased 6 c3 multiplexer ,the oldes on is from 2006 and still running .
You can use them on trucks too .

Cost 1000 eur without dilivery

From the photos at their web site one cannot say anything definite but I'm sure their tools are good. But you can get the same stuff at about one half the price, your choice.

[the_riddler]

From the photos at their web site one cannot say anything definite but I'm sure their tools are good. But you can get the same stuff at about one half the price, your choice.

I wish all "GOOD CLONE" manufactor would include photos of the machines internals,
Then these suppliers will get the orders

Plus it would make me happier......

[diagnoza_auto2000]

Many Rs232-485 converter box are empty...

[Dreamer001]

Hello to everybody,

i am new here and want to share my pictures of my MUX. I have two different boxes but the same electronics are inside. Has anybody issues wit this kind of MUX.

[Dreamer001]

More pictures...

Does somebody know is it better to work with the PART_D2 or PART_T for the MUX?

[gmatj]

More pictures...

Does somebody know is it better to work with the PART_D2 or PART_T for the MUX?

If you mean in cal.ini yes , you put PART_D2 (whatever your pictures are)
Rgds
G.

[DB_member]

Hello to everybody,

i am new here and want to share my pictures of my MUX. I have two different boxes but the same electronics are inside. Has anybody issues wit this kind of MUX.

Neither one is the high quality clone. I know one owner who had the second one and it got broken in a month and an expert could not repair it. Experts claim this is an issue with the tool, I have not personal experience and can only pass the view.

Personally I would stay away from these because the price difference is not significant between these and the high quality clone.

[Dreamer001]

THX DB-Member

Do you know where can i get this high quality clone.
Like you say i have already problems with it. Would like to get one what works for longer time.

Rgrds

[DB_member]

THX DB-Member

Do you know where can i get this high quality clone.
Like you say i have already problems with it. Would like to get one what works for longer time.

Rgrds

What sort of problems have you faced? I understood these typically work pretty much equally to good ones, until they fail.

Could it be an intermittent wiring/connector issue (so far)?

[gmatj]

What sort of problems have you faced? I understood these typically work pretty much equally to good ones, until they fail.

Could it be an intermittent wiring/connector issue (so far)?

Hi DB_member

I have bought 1 x MB C3 (+2 friends bought C3s after my recomendation) and 1 x BMW OPS from a chinese seller who it has proved that he know about the products he sells - He was very responsive to support. And his prices very competitive.

I just do not want to refer to his name as I do not want to get into advertising game !!!

All Muxes still work pefect (the C3s have not been tried on 24V)

Rgds
G.

P.S. I have opened the C3 and it looks as the one in the photos above. (photo attached)

[DB_member]

Hi DB_member

I have bought 1 x MB C3 (+2 friends bought C3s after my recomendation) and 1 x BMW OPS from a chinese seller who it has proved that he know about the products he sells - He was very responsive to support. And his prices very competitive.

I just do not want to refer to his name as I do not want to get into advertising game !!!

All Muxes still work pefect (the C3s have not been tried on 24V)

Rgds
G.

P.S. I have opened the C3 and it looks as the one in the photos above. (photo attached)

I would not use this one on a 24 V vehicle. The regulators (one transistor) either have no heat sink or only a small one.

[Dreamer001]

Hi,

my problem with this MUX was that they stopped working after about a month after they worked good on the beginning. The LED is working but the MUX is not reachable from DAS. In the SD Connect Toolkit i can see that the MUX is there on COM 2 port but it is not reachable.

Rgds

[gmatj]

Hi,

my problem with this MUX was that they stopped working after about a month after they worked good on the beginning. The LED is working but the MUX is not reachable from DAS. In the SD Connect Toolkit i can see that the MUX is there on COM 2 port but it is not reachable.

Rgds

Are you running the same version of s/w ??

When did it stop ?? It is highly unlikely that all h/w got a defect at the same time

Did you use the blacklist fix ??

Lots of questions but most important is did you change anything in software in your laptop ????

Rgds
G.

P.S. What do you get on the CAESAR test ??