UPAUSB adapter's by user

[elchip]

Hello to all for first ,

I was have need's for these adapter's and after looking and not find to buy I was decide to make it at home.
Here are two adapter's , one for 68HC(7)05 PLCC52 and second is for famous PDIP28 68HC(7)05E6 SMD .
The PDIP28 68HC(7)05E6 SMD is maked from two part : main board with XTAL and resistor's bottom and PDIP28 SMD footprint top board connected with SIP in two side.That is need to prevent unsolder any part at re flow patr of mount and unmount Motorola in reprogramming attempt...
Adapter's is pin to pin compatible to UPAUSB DB9 connector and all what you need is to connect it to UPAUSB.

68HC7_05_UPAUSB.jpg
68HC7_05_UPAUSB_side.jpg
68HC705E6_front.jpg
68HC705E6_on_UPAUSB.jpg
68HC705E6_UPAUSB.jpg

The pictures is to give you idea hove to do it.
You have schematic of adapter's here on DK and my post is to push peoples to make it itself !
If someone need and don't kow to make in that case I can make and send.
Adapters are for education purpose only.
THESE POST IS NOT SALE POST ONLY AS HELP
The best regard's to all