volvo s80
Register
Results 1 to 8 of 8

Thread: volvo s80

  1. #1
    DK Veteran
    Join Date
    Jul 2009
    Posts
    330
    Thanks
    50
    Thanked 19 Times in 15 Posts

    Default volvo s80

    hi i have this VOLVO S80 2800 T6 BITURBO ME7 1037359462 0261206829 and i want to read 29f800 can i use galletto or kwp2000 to read?or i have to remove the 29f800? thx in advance....

  2. #2
    Member
    Join Date
    Nov 2009
    Posts
    48
    Thanks
    3
    Thanked 3 Times in 3 Posts

    Default

    Hi

    You have to solder it of and read it, and reflash it.

    //Dennis-

  3. #3
    DK Veteran rsibiza's Avatar
    Join Date
    Oct 2009
    Posts
    1,739
    Thanks
    0
    Thanked 41 Times in 28 Posts

    Wink

    Most older and newer Volvos can be done only with paralell programmer,as Dennis says....

    and i had on 2 Diesel(V70/S60) lot of work to disconnect and reconnect ecu....you need to pay lot of attention with this kind..

  4. #4
    DK Veteran
    Join Date
    Jul 2009
    Posts
    330
    Thanks
    50
    Thanked 19 Times in 15 Posts

    Default

    thx ..i will put some pictures

  5. #5
    Top Poster +
    Join Date
    Dec 2009
    Posts
    231
    Thanks
    14
    Thanked 14 Times in 14 Posts

    Default

    some tools from ecu pins also

  6. #6
    Member
    Join Date
    Nov 2009
    Posts
    40
    Thanks
    2
    Thanked 1 Time in 1 Post

    Default

    Galletto can do it in boot mode. Just select some car with ME7 and correct chip size.

  7. #7
    DK Veteran
    znoki's Avatar
    Join Date
    Dec 2010
    Location
    land of plenty
    Posts
    383
    Thanks
    30
    Thanked 237 Times in 85 Posts

    Default

    Quote Originally Posted by somad View Post
    Galletto can do it in boot mode. Just select some car with ME7 and correct chip size.
    Somad wrote true! I'm often using Galletto in boot mode for other ME7 ECUs, but be careful, once I found bit swap.

  8. #8
    Member
    Join Date
    Jan 2011
    Location
    Romania
    Posts
    89
    Thanks
    0
    Thanked 28 Times in 5 Posts

    Default

    I manage to corrupt the flash with MPPS, you have to be very careful because it can read only a small part of the flash, 512k in my case instead of the whole 1 Mb, when i wrote the flash the car did not start in i had to find another ECM with the same flash. Now i learn my lesson and desolder the flash, read and write with BeeProg and no problems .

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •