opcom kiled my TC (TCM)!!!

[enyckma]

hi guys! some time ago while I was playing with OPCOM interface, I got this error - u2106-00 Bus no communication with TCM(Transmition Control Module).
the car is working good, same with abs, but I don't think that TC & ESP works anymore.
also the esp light is on all the time.

I would appreciate any help in advance, THX!

[Meat-Head]

HUH, explain more, why was you playing with opcom?
have you tried battery on/off?

[Ashraf6119]

Hi

HUHHHHHHHHHHHHHHHH Also did you try changing any Configuration in Programing Options by mistake.

Check the Multi Plug connection on Both Modules TCM, and ABS.

Ash

[enyckma]

have you tried battery on/off?

yes with no result!

Hi

HUHHHHHHHHHHHHHHHH Also did you try changing any Configuration in Programing Options by mistake.

Check the Multi Plug connection on Both Modules TCM, and ABS.

Ash

I played with programing options. there is a module where I can not programing the TCM. it says "programing failed" i think is the ecm but i'm not shure! i will try tomorow with 08 2010 version of op com and i will post the result.

[OMBRE]

Do you have genuine OP COm?

If not, the newest version of OP COM kill your clone cable. Be careful.

[Meat-Head]

Do you have genuine OP COm?

If not, the newest version of OP COM kill your clone cable. Be careful.

Up to now there several members on here with the China clone working

[enyckma]

Do you have genuine OP COm?

If not, the newest version of OP COM kill your clone cable. Be careful.

i have not used a genuine, but why do you ask this??
i did not use that version that kills the clone! i think it was 090714.

[Ashraf6119]

yes with no result!



I played with programing options. there is a module where I can not programing the TCM. it says "programing failed" i think is the ecm but i'm not shure! i will try tomorow with 08 2010 version of op com and i will post the result.

Hello,

I strongly advice you NOT to mess around with Programing Options if you are NOT SURE what you are doing and if you don't know how to use Op-Com.

You might end up even Immobilizing this vehicle just by playing with Programing Options.


So, be very careful.

Ash

[enyckma]

it says "programing failed" i think is the ecm but i'm not shure! i will try tomorow with 08 2010 version of op com and i will post the result.

it says that in the EHPS section. ...& nothing resolved till now . i think he last option is gm tech 2.

[enyckma]

hi guys! i've solved the problem with the:
U2106 can-bus no communication with tcm (transmission control module) error code.
the problem apeared because i set the transmission "present" in al electroni control units with high speed bus.
so, i set again the transmission "not present", because my transmission is not automatic.
now the traction control works again and the abs light is off.
BIG thanks for all who answered me and hope to help others who got this error like me

[Ian B]

I strongly advice you NOT to mess around with Programing Options if you are NOT SURE what you are doing and if you don't know how to use Op-Com.

Exactly !!!!!!

[bibkare]

hi guys! i've solved the problem with the:
U2106 can-bus no communication with tcm (transmission control module) error code.
the problem apeared because i set the transmission "present" in al electroni control units with high speed bus.
so, i set again the transmission "not present", because my transmission is not automatic.
now the traction control works again and the abs light is off.
BIG thanks for all who answered me and hope to help others who got this error like me

Yea i know what you mean, once i entered into fuel options and i wanted to enter type of fuel water instead of petrol but it still goes only on petrol, damn opel it just won't listen

[Ashraf6119]

Yea i know what you mean, once i entered into fuel options and i wanted to enter type of fuel water instead of petrol but it still goes only on petrol, damn opel it just won't listen

You should have changed into ''Paraffin''.............I am sure it would have accept this option happily