reading dumps & calculators for pin and key codes

[Bishop c4]

hello again I found this a litle piece of info that show how to make a lector RFID with a phone (if some one want to make) and more
http://meag.tele.pw.edu.pl/pubs/pdf/...Box-Thesis.pdf
and this magazzine (if you dont want to make a lector RFID with a phone) but with a little material no expensive and with another info to
http://down.jdgcs.org/file/download/...70ACE51F6570F/

Best Regards all of you

[ray-ray]

prius dump zen bull could not make a working key from dump.the dump looks good so the program is not working
(not a clone machine.) can some post the key value?

[nzlockie]

looks pretty straight forward to me, The key shown in the bottom half of the picture is a working existing key right?

Master Key #1: 7EF62135 A0000000 005D387E 0000
Master Key #2: 7E4F55B3 A0000000 00A30A7E 0000
Valet Key #1: 7E26350D A0000000 00BFAE7E 0000

All these values are written as Hex which is what you would use to write the keys to start this vehicle.

[juan andres]

Hi, I need help with a tidal fiat weekend, I need to program the remote central locking and alarm, and I have the 4 digit code, I have the procedure to program but not the code, anyone know how to extract it?

[ray-ray]

i got it thanks for your guide nzlockie.

[Bishop c4]

Ok, enough of the "add me to the list" spam.

I just run my dumps through my TMpro and it spits out the key, to me it's a bit like witchcraft.

Believe me guys, if I knew how it works I would of written a guide on it!

Here is a starting point for us all.
I took this dump off a 4C 2000 Toyota land cruiser today and this is the key data that it spat out.

7E476569C000000000DF377E0000

This key data is stored somewhere in the 32 lines from this dump.
Impress us all and show us where it is somebody!

this is the location of the keys
Key 1: 7E E2 A6 96 03 00 00 00 00
Key 2: 7E E2 A6 96 03 00 00 00 00
Key 3: 7E 5E A7 96 03 00 00 00 00

key 1 master
key 2 master
key 3 valet

about the tiris values no info yet
Regards

[cammy25]

Hi guys ,

here is a source file for a transponder machine for 4C. Its in PASCAL.

[ahl]

If one is going to post information gleaned from this forum on another locksmith forum, it would be considered good form to not claim the work as one's own.

At least have the decency to credit where the work came from and that you are not the original author. Then you may not look like such a dik when you post incorrect details for the transponder, also pilfered from here, and again claimed as your own work.

It kind of shoots your credibility to sh!t.....

[Digital Auto's]

How about a link/clue....

[Geps]

Hi,

I'm also interested in this and have enough of an electronics background to make sense of all this so far.

Cammy, when your file was unzipped I appeared to get a file that I couldn't open?

[ahl]

How about a link/clue....

busted_deidentified.jpg

Identifying information removed to protect the innocent and the not so innocent.

[gazzaull22]

i am please the info i supplied is some help but if your going to copy it at leased change it a little

[cammy25]

If one is going to post information gleaned from this forum on another locksmith forum, it would be considered good form to not claim the work as one's own.

At least have the decency to credit where the work came from and that you are not the original author. Then you may not look like such a dik when you post incorrect details for the transponder, also pilfered from here, and again claimed as your own work.

It kind of shoots your credibility to sh!t.....

Is ithis towards me??
if it is ....WHAT THE ~~~~ ARE YOU TALKING ABOUT???


here is right one Geps

[ahl]

Is this towards me??

No it wasn't Cammy. It turns out that the person concerned is technically savvy, but not the best of writers. It was a copy and paste v's cross reference then write issue.

Cheers!

BTW, what makes you think that it was you?....

[cammy25]

then sorry for the offence.

because you said that after i posted a sourcefile.