Quote Originally Posted by ottomotto View Post
I have SDP3 2.6 running locked to yellow USB key from autokg. Anyone knows how to emulate it?
Use this proccedure

http://rapidshare.com/files/64394078...-EDGE.rar.html


INSTALLATION INSTRUCTIONS

1. Unzip and Unrar.

2. Make sure you have the latest Sentinel dongle drivers installed.

3. To dump and solve make sure the original Sentinel key is connected
to a LPT or USB port then Run EDGESPRO.EXE in the EDGE dir.

4. Select the Sentinel tab, choose a filename for the result .dng
file, and press "Dump&Solve".

This can take some minutes depending on what type and how many
algorithms needs to be recovered.

The "Specify Developer Id" and "Specify Write Password" options
are for advanced users, and not required.

"Specify Developer Id" allows you to dump and solve from emulators
without physical dongle.

"Specify Write Password" allows you to dump faster, if you know
cell 4 (write password).

5 Now run SENTEMUL2007.EXE and press "INSTALL" button and if installation
was successful driver status window will be changed to:
"Status : driver is installed".

6. Now you need to open "Emulator" tab, Then you press "Start Service"
button. If everything is ok you'll see "SENTINEL Emulator Service
is running"

7. Open "DONGLES" tab and press the "Load dump" button, then navigate
to the .dng file you created with EDGESPRO.EXE[/QUOTE]