bartenders13 (19th January, 2023), martinracing (6th September, 2013), mexanico1971 (19th April, 2016), svallecilla (4th June, 2023)
XR25PC is a xr25 (wallet) based program for old renault cars
the program is based in visual basic 2008 express and .net framework 3.5 sp1
the interface is based in ftdi232 chip, easy to build from usb>ttl 5v converter available on ebay, just add some resistors and transistor
it only got two wires to car 12pin dlc conector: ground (pin2) and k-line (pin9)
it's free! it is read only: errorcodes and live data
it also works with kkl interface for models with obd2 16pin connector
it needs .net 3.5 sp1 installed on your computer, which must be updated at maximum from windows update so that all fonts characters can be read correctly
i tried on my clio monopoint and works perfect
after some installation problems in first versions, that a forum user and myself help author to fix, v1.10 is last released
if you people ask author for the software through his e-mail (instead of downloading from rapidshare, etc), try it and e-mail him with feedback about results, maybe author see people is interested and add more functions to the program
all the info:
ECU-GAUGE (XR25PC included) universal pc based obd obd2 program
RENAULT DOCUMENTATION | Renault Diagnostique / Diagnostic
edit: new site http://en.calameo.com/books/000677135532be26372c3
dont need to ask for the program here car-diagnose@live.nl
hit "thanks" button if this is useful!
http://es.calameo.com/books/0000223209a77db49a737
EDIT: ALL DOWNLOAD LINKS DEAD
SOLUTION IS HERE
http://www.digital-kaos.co.uk/forums...easy-installer
----------------------------------------------------------
----------------------------------------------------------
para todos los que habeis estado esperando una interfaz/software ~~~~~~~O para vuestro renault 12pin (tambi?n 16pin):
mi alegr?a fue may?scula cuando instal? y prob? XR25PC en mi clio monopunto con ecu fenix
tras unos problemas con el instalador de las primeras versiones del autor, al que ayud? a solventar, ya va por la 1.10
el programa est? ba**** en visual basic 2008 express y .net framework 3.5 sp1
la interfaz est? basada en el chip ftdi232, es facil de construir a partir de un convertidor usb>ttl 5v disponible en ebay
tan solo hay que a?adir unas resistencias y un transistor
solo tiene dos cables hacia el conector de 12 pines: uno a masa (pin2) y otro a linea k (pin9)
tambi?n funciona con una interfaz kkl para modelos con conectores obd2 de 16 pines
de momento, la interfaz/software ~~~~~~~o es de solo lectura de los codigos de error y valores en tiempo real de sensores
si la prueba m?s gente se ir? puliendo
al estar m?s gente interesada ofrecer? m?s funciones
he de decir que para ver los caracteres correctamente hay que actualizar el xp al m?ximo en windows update
y necesita tener instalado .net framework 3.5 sp1
toda la info:
http://es.calameo.com/books/000022320991da89dbd16
http://es.calameo.com/subscriptions/35212
edit: sitio nuevo http://en.calameo.com/books/000677135532be26372c3
ya no se necesita pedir por email ("i am interested in xr25pc...", o "i want to try xr25pc...", etc) a:
car-diagnose@live.nl
espero un "gracias" por divulgar esta informaci?n
http://es.calameo.com/books/0000223209a77db49a737
EDITO: TODOS LOS ENLACES ROTOS
SOLUCION AQUI
http://www.digital-kaos.co.uk/forums...easy-installer
Last edited by manocao; 1st April, 2015 at 11:35 AM.
bartenders13 (19th January, 2023), martinracing (6th September, 2013), mexanico1971 (19th April, 2016), svallecilla (4th June, 2023)
Hi my friend.
It is a very good and new concept.
You did a great job.
I appreciate that.
Good luck
Hi,
I had a go at loading this about 2 months ago and couldn't get it to comunicate with my AGV4500 which I bought specificaly for the job.
It seemed to select an odd baud rate and I could find a way to alter it.
Doe sit run at 96000 ?
I got most of the fisch sheets in English.
I will delete and start again.
Will feed back
renault old 12pin ecus work at 62500bps baudrate
some work at 10400bps:
For the megane 1 the KWP2000 protocol is implemented.
The cable is a standard ISO lead or ISO interface. In the schematic the Rx line must be divided to adapt from 12 to 5 Volt 10k//10k
Instead of the 62500 baud 10400 baud is used with a specific protocol 10.nJ
this is an example how the datastream read from ecu looks like: (it can be 43 or 39 bytes long)
FF 00 72 04 09 D6 D7 81 C4 20 9D 11 64 0D 0D 17 92 D6 A0 00 46 49 C4 00 00 00 00 00 00 76 33 19 19 19 EE EE EE EE EE EE EE EE EE
some info by author:
The XR25 Protocol was known since 1988.
The car sends a continuous telegram based on the RS232C protocol
with the only change in voltage levels of 0 to 5 Volt.
It uses an open collector output with a limited sinking current. (-0,8mA max)
Do not put voltage on the pin 9 of the diag connector.
You can apply 12V on it wit a voltage division resistive network that limits
it to 5 Volt and max 12V/15kohm. Else your ECU com port wil be blown
(it happened to me 69HC11 fenix 3b)
With a voltage convertor it is possible to read the values with a PC.
The values are hexadecimal coded.
On the Renault fiches (yellow cards) numbers of the parameters are
given like #1 or #2. These numbers represent a value of for example
IAT = air temperature.
In the telegram sent by the cars ECU the value is always on a fixed
position. Each position has a decoding formula. For the temperature
it is the decimal value * 0.625 -40 degrees.
Last edited by manocao; 9th October, 2010 at 12:50 AM.
Hi
the real interest is in the key programing. Even the dealers go th the xr25 in preff to the Clip.
I have requested the latest version and will start from scratch. So it will take me a few days to fit the tests in.
Thanks
version 1.14 is out. author has debugged it and he came up with the timing problems of the laguna aircon. he made the timeouts larger and it works. Similar was the start of the megane airbag. A continuos loop checks for it. The fiches are still auto-detected and can be unlocked.
he still has to debug it so that it does not give errors.
If your car has extra functions you need a 12pin to 16 pin K-L adapter cable with K-line = pin 11. You also need a VAG-com USB-KL convertor FTDI based.
he uses the AGV4500. There are cheaper versions available.
Soon he will mail the link for the complete version.
the new version is out! it is 1.15
this version is to be tested for the non-engine ECU's like Airbag Aircon ABS.
the engine module works as well
ask author for it on car-diagnose@live.nl
post your testings here so we can see how it works
Good afternoon
Why can not I install XR25PC always gives error
Can you teach me step by step how to install in windows xp
Thanks
hi
Can anyone help?
is a good software
read 1st post
you need to install microsoft .net framework 3.5 sp1 first! google it, download it and install it!
Last edited by manocao; 19th October, 2010 at 12:33 PM.
great software!
works fine in my case...
only problem is, that my granny notebook has a max
resolution of 1024x768 points.
it seems, the software use a larger resolution!?
maybe someone knows if it is possible to change resolution?
works on:
Clio 16V C57D '93
Clio 16V C57D '95
Clio 1.8 RSI C579
Clio 1.4 '93
Clio 1.2 '95
it's just for fenix/renix ecu.
the manuell says, its also possible for twingo, but the older ones have magneti marelli ecu, so it wont work!
christian
hi
Why can not I install XR25PC always gives error
Can you teach me step by step how to install in windows xp
Thanks
i have done it this way:
naked windows XP system with SP2
installed:
windows installer 4.5
dotnet 3.5 sp1 (+update)
you can get from microsoft homepage
then i readed the readme.txt
(it says you have to copy some files, and make
some directorys...)
then installed xr25pc
christian
it uses 1280x800
you can solve it with GiMeSpace Desktop Extender
info GiMeSpace Desktop Extender Edition - GiMeSpace
free edition GiMeSpace Free Edition - GiMeSpace
@manocao:
i have installed the gimespace, now i can "scroll" on
desktop.
but, this doesnt solve my problem, in my xr25 window
the table on the right side is just shown half.
doesnt matter if i maximize the window or i do scroll
the desktop by gimespace...
maybe the software reads the resolution and fitts the
window size!?
i'am in contact with the programmer, he also send me
the information with gimespace but i doesnt work
in my case...
maybe there is something missing on my system?
christian
Bookmarks