Updating Atmega162 VCDS and other interfaces

**spychu14** · 6th July, 2011, 08:50 AM

Bible of MCU cracking

http://www.cl.cam.ac.uk/techreports/UCAM-CL-TR-630.pdf

**cumelsk** · 23rd April, 2012, 02:25 PM

Fuses and Lockbits? elnec beeprog SPI-ATMEGA 162
Thanks

**klostazy** · 16th February, 2013, 10:12 PM

how set the BeeProg, fuses and lockbits

**BigJ** · 26th February, 2013, 09:35 PM

Awesome thread.... Some of the most fascinating stuff I have read!

Thanks to rsibiza and everyone involved..

Regards
J

**DiagService** · 6th April, 2013, 10:46 AM

Its possible programing Atmega 162 with UPA

**mexanico1971** · 2nd May, 2013, 01:33 AM

yes is possible !
I"m using upa ori but always give me bad mosi 3,64V don"t know why !

**cagatay87** · 2nd May, 2014, 11:04 PM

Originally Posted by mexanico1971

yes is possible !
I"m using upa ori but always give me bad mosi 3,64V don"t know why !

try to change jumper on upa

**dimitar** · 4th May, 2014, 05:57 PM

Originally Posted by mexanico1971

yes is possible !
I"m using upa ori but always give me bad mosi 3,64V don"t know why !

Thats because upa is amateur crap

**szogun0** · 11th May, 2014, 04:56 PM

You're wrong mate.
Upa is good enough for Atmega 162, operator can't do programming properly.

**vali2017** · 5th February, 2016, 10:50 AM

very good tutorial
Thanks

**kirill443** · 3rd May, 2016, 02:38 PM

Hello!!! Help is needed. I'm posting VAG COM 15.7.0 from China with ATMEGA162 + 16V8B + FT232RL. Chinese non-renewable sends Eng. version 15.7.0 . How to combine this wire with the updates , or even be a Russian VCDS? How to do it all . It is necessary to fill in the firmware ? As you do this ?
http://www.aliexpress.com/snapshot/7592217653.html

333.jpg