Hi everyone,
Does anyone know how to simulate 05 Mini Cooper occupancy pad using diodes and resistors?
There are three wires running from floor harness and disappear into the seat cushion (k-line, 12v, GND)... but from there does anyone know where to hook up the (diode / resistor)?
Thank you!!
Results 1 to 10 of 10
-
12th October, 2010, 08:27 AM #1Senior Member
- Join Date
- Jul 2009
- Location
- Canada
- Posts
- 264
- Thanks
- 47
- Thanks
- 11
- Thanked in
- 7 Posts
2005 Mini Cooper Ocupancy simulator
-
12th October, 2010, 11:05 AM #2DK Veteran
- Join Date
- Sep 2010
- Location
- Bulgaria
- Posts
- 701
- Thanks
- 232
- Thanks
- 214
- Thanked in
- 109 Posts
Only with emulator
Originally Posted by habs44
-
13th October, 2010, 01:03 AM #3Senior Member
- Join Date
- Jul 2009
- Location
- Canada
- Posts
- 264
- Thanks
- 47
- Thanks
- 11
- Thanked in
- 7 Posts
Thank you!
I purchased carprog universal simulator... when I simulate "occupied" using their instructions for Mini, the srs dons't recognize it... but when I simulate it using 05+ BMW, it worked for 3 days, then the airbag light came back on... Now everytime I plug in emulator, the main SRS fuse blows... I checked all my soldering points and wiring.. and can't figure it out...
Anyone had this issue before?
Thanks!
-
13th October, 2010, 03:08 AM #4DK Veteran
- Join Date
- Jul 2010
- Location
- melbourne, australia
- Posts
- 1,043
- Thanks
- 421
- Thanks
- 233
- Thanked in
- 157 Posts
sound like the occupancy emmulator has shorted out.
I have a pic of how to make an emmualtor which I will post, its not mine, I wont take the credit, I found it here a little while ago & thought it might come in handy, so to whoever wrote it, thanks
-
13th October, 2010, 07:57 PM #5Member
- Join Date
- Mar 2009
- Posts
- 63
- Thanks
- 0
- Thanks
- 0
- Thanked in
- 0 Posts
hi do you know how to use ncs exper that comes with inpa maybe i can help
-
14th October, 2010, 06:28 AM #6Senior Member
- Join Date
- Jul 2009
- Location
- Canada
- Posts
- 264
- Thanks
- 47
- Thanks
- 11
- Thanked in
- 7 Posts
In response to cqae, thanks for the help, but that diagram doesn't make any sense to me.. I have 3 wires running into cushion. (12v, gnd, k-line)...
No, I don't have INPA.
Are you saying that I could change coding to by-pass occupancy check?
Thanks anyways!Last edited by habs44; 14th October, 2010 at 07:33 AM.
-
15th October, 2010, 04:01 AM #7DK Veteran
- Join Date
- Jan 2010
- Posts
- 352
- Thanks
- 18
- Thanks
- 16
- Thanked in
- 13 Posts
Yes you can, by changing the dump in the SRS controller
-
15th October, 2010, 07:18 AM #8DK Veteran
- Join Date
- Jul 2010
- Location
- melbourne, australia
- Posts
- 1,043
- Thanks
- 421
- Thanks
- 233
- Thanked in
- 157 Posts
sorry the diagram is for a bmw-i thought they would be the same
-
16th October, 2010, 08:06 PM #9Member
- Join Date
- Mar 2009
- Posts
- 63
- Thanks
- 0
- Thanks
- 0
- Thanked in
- 0 Posts
yes you can Originally Posted by habs44
In response to cqae, thanks for the help, but that diagram doesn't make any sense to me.. I have 3 wires running into cushion. (12v, gnd, k-line)...
No, I don't have INPA.
Are you saying that I could change coding to by-pass occupancy check?
Thanks anyways!
you can just unplug the seat occupancy sensor and disable it using ncs exper
-
17th October, 2010, 07:20 AM #10Senior Member
- Join Date
- Jul 2009
- Location
- Canada
- Posts
- 264
- Thanks
- 47
- Thanks
- 11
- Thanked in
- 7 Posts
Seat occupancy simulated, now buckle issue!!
Thank you all for your help.. I don't have NCS, so I decided to use universal simulator from Codecard.
It got the occupancy working but now the chime rings all the time for passenger seat belt on buckled...
does anyone know how to simulate the seatbelt buckle? (w/o ncs)
I read the voltage:
Seatbelt plugged = .67volts
Seatbelt unplugged = .72volts
Any help would be greatly appreciated! Thank you!
Reply With Quote
Bookmarks