Hello.
I bought a Lexia at this auction:
https://www.aliexpress.com/item/2016...27424c4dpJ4eqd
Unfortunately it does not read the VIN and has a communication problem with several car controller. I have Citroen C2 from 2008.
I undressed the device and noticed that one optocouplers (3 from the left is wrong soldered)
Should I soldering it by turning 180 degrees like the last one (first right)?
IMG_20180822.jpg
There is also no resistor 103 (PULL UP) on the other side of the PCB or I should also solder it?
I'm asking because my board is a bit different than the ones from the topic
24.08
I turned the optocoupler and soldered the resistor, unfortunately it did not help. He still does not read the VIN at C2, the Peugeot 1007 read normally. Version 7.57
Any ideas?
Results 1 to 15 of 356
Thread: Lexia PP2000 repair
Threaded View
-
22nd August, 2018, 04:35 PM #11Junior Member
- Join Date
- Jan 2017
- Posts
- 24
- Thanks
- 24
- Thanks
- 33
- Thanked in
- 4 Posts
Last edited by 7key; 24th August, 2018 at 07:50 AM.
Reply With Quote
Bookmarks