BMW ALL FEM BDC Full Soluction

**aassfour** · 21st February, 2019, 08:27 AM

If any of the guys from the forum has any problem with BMW FEM BDC or IF FEM BDC are even totally Lost and not Available.
we can create a new FEM for the car. all what is needed is just the DME
this is a FREE SERVICE guys only for DK members who have problems with FEM or killed any FEM while programming

**Fallen** · 21st February, 2019, 08:34 AM

Does the DME need to be sent to youu or is it done by dump?

**aassfour** · 21st February, 2019, 08:42 AM

Originally Posted by Fallen

Does the DME need to be sent to youu or is it done by dump?

can be just dump

**super jumbe** · 21st February, 2019, 09:06 AM

Need more info.

**aassfour** · 21st February, 2019, 09:33 AM

Originally Posted by super jumbe

Need more info.

if you have dead FEM or if you dont have FEM at all missing module. we can create a FEM for your car, u can send me the FEM you want to create and i will charge u only the shipping fee DHL. the service is free for DK but its not to be used as profit generating. this is to help members who have problems. all i need is DME
the FEM will be in state of ALL KEY UNUSED. you just need to program a NEW key to it ( i can do that for u ) and you need to just plug it in and finalize coding with esys or any other device that does coding and CAR will run

**Bryanlocksmith** · 21st February, 2019, 09:47 AM

Originally Posted by aassfour

If any of the guys from the forum has any problem with BMW FEM BDC or IF FEM BDC are even totally Lost and not Available.
we can create a new FEM for the car. all what is needed is just the DME
this is a FREE SERVICE guys only for DK members who have problems with FEM or killed any FEM while programming

What about other members ?

**rola1971** · 21st February, 2019, 09:50 AM

Originally Posted by aassfour

if you have dead FEM or if you dont have FEM at all missing module. we can create a FEM for your car, u can send me the FEM you want to create and i will charge u only the shipping fee DHL. the service is free for DK but its not to be used as profit generating. this is to help members who have problems. all i need is DME
the FEM will be in state of ALL KEY UNUSED. you just need to program a NEW key to it ( i can do that for u ) and you need to just plug it in and finalize coding with esys or any other device that does coding and CAR will run

what about steering lock?it is need reset to virgine?

**aassfour** · 21st February, 2019, 10:00 AM

Originally Posted by rola1971

what about steering lock?it is need reset to virgine?

if car equipped with steering like MINI yes u need to

**aassfour** · 21st February, 2019, 10:06 AM

Originally Posted by Bryanlocksmith

What about other members ?

this is only for DK members who face a problem with FEM or lost the FEM during programming or any other case cause i know how hard it is when this happens with someone and ending up cost him fortune time and reputation.
so with the cost of DHL only i can help. it is not to generate profit from it here on DK.

**rola1971** · 21st February, 2019, 10:41 AM

Originally Posted by aassfour

this is only for DK members who face a problem with FEM or lost the FEM during programming or any other case cause i know how hard it is when this happens with someone and ending up cost him fortune time and reputation.
so with the cost of DHL only i can help. it is not to generate profit from it here on DK.

one time i have this problem in f30 2014 manual gearbox.it have steering lock.and you need i have virgine file to steering lock.
but only for good members

**aassfour** · 21st February, 2019, 12:22 PM

Originally Posted by rola1971

one time i have this problem in f30 2014 manual gearbox.it have steering lock.and you need i have virgine file to steering lock.
but only for good members

as for me thanks mate , i can unlock ELV in eeprom. it will be very useful for other members who need that

**gilahish** · 21st February, 2019, 02:02 PM

Thank you! i killed fem 2 weeks ago and it was a pane in the ass. very nice to know i can have such a good solution!

**K1nd3r** · 21st February, 2019, 08:32 PM

what about gearbox?

**Adel75** · 25th June, 2019, 08:34 AM

Originally Posted by aassfour

If any of the guys from the forum has any problem with BMW FEM BDC or IF FEM BDC are even totally Lost and not Available.
we can create a new FEM for the car. all what is needed is just the DME
this is a FREE SERVICE guys only for DK members who have problems with FEM or killed any FEM while programming

Hi Mate ,

My car as status in title is : BMW f30 2103 N13 , 316 manual

my brother took it and have done a mileage down , he said the guy took the 95128 eeprom from FEM and flash it , then the car stopped working , even the ignition wont come on

I took another FEM a used one and try , no ignition , then change ELV code it and program it and then car starts , once I tried a second original working keys I have : the car wont start and then even Key1 come inactive : no ignition no starting

please can u help : I doubt ELV is touched again , the ELV i mounted was a used one but after programing and coding ISTA every thing working

I have Xprog , I have original file from original EEprom , I will write u and attach to u on the thread

what embrace me is that no ignition on , so I dont know if I could connect to the car to flash it with Esys or how to do !

please help and advise

with kind regards

Adel