ewa net

[davtrev]

Hello i want to install ecpnet and wisnet do i need to install a base version first, i have 2010.09

[euror]

All you need beside 09/2010 are WIS 07/2010 disc 2 and 05/2010 EPC a1 and a2.

[DB_member]

Hello i want to install ecpnet and wisnet do i need to install a base version first, i have 2010.09

If you do it properly, you should be able to go directly to the current version. Of course you need all the necessary DVDs where some come from the base release.

edited: this became a duplicate, euror was a few seconds faster

[davtrev]

I am downloading the 07 discs now, can you tell me what order i need to install them in, i have found a few manuals but im not sure which one to follow as there different


i have give it one go and seem to have messed up, i installed disk one of 05, then installed Wis 07 and updated to 09
then i tired to install epc data base but i keep getting error message about wrong disk installed, i tried every disk i have

in fact i have tried a few ways now and cannot install the ecp, i created a back hard drive just before i try to install, so now i have gone back to before i messed up

Can someone give me a little guidance ?

[davtrev]

none of the disk's have the start.html

what disk do i run the ewa/setup.exe from

[Patrian]

none of the disk's have the start.html

what disk do i run the ewa/setup.exe from

Listen with ATTENTION m8...

I will told you HOW you can have WIS 10.2010 & EPC 9.2010 in your System...

Those they are at this time the LATEST'S Versions...

So... Here you are:

For to having WIS 10.2010 you need to having those 2 DVD's:
WIS_1010_1of2
&
WIS_1010_2of2
NOTHING else!!!

For to having EPC 9.2010 you need to having those 3 DVD's:
From Version 9.2010 the ONLY & 1 DVD:
EPC_0910_1of1_b1
And from Version 5.2010 the 2 DVD's:
EPC_0510_1of2_a1
&
EPC_0510_2of2_a2

HINT-TIP:
Those 2 DVD's from 5.2010 you will using those ALWAYS (in a fresh Installation) with ANY future NEWER EPC Version
(ie 11.2010 who is on the way...), UNTIL they Releasing NEW & FULL EPC Version from Daimler...
When you making simply Update in your System with ALL READY installed EPC, you DON'T need those...
Just & ONLY the 1 DVD from the Newer Version that you will have (ie as i said 11.2010...)

Now, use 1 Guide from those that you have and GO AHEAD!!!

Good Luck!

Regards!

[davtrev]

that i understand.

[automite]

Listen with ATTENTION m8...

I will told you HOW you can have WIS 10.2010 & EPC 9.2010 in your System...

Those they are at this time the LATEST'S Versions...

So... Here you are:

For to having WIS 10.2010 you need to having those 2 DVD's:
WIS_1010_1of2
&
WIS_1010_2of2
NOTHING else!!!

For to having EPC 9.2010 you need to having those 3 DVD's:
From Version 9.2010 the ONLY & 1 DVD:
EPC_0910_1of1_b1
And from Version 5.2010 the 2 DVD's:
EPC_0510_1of2_a1
&
EPC_0510_2of2_a2

HINT-TIP:
Those 2 DVD's from 5.2010 you will using those ALWAYS (in a fresh Installation) with ANY future NEWER EPC Version
(ie 11.2010 who is on the way...), UNTIL they Releasing NEW & FULL EPC Version from Daimler...
When you making simply Update in your System with ALL READY installed EPC, you DON'T need those...
Just & ONLY the 1 DVD from the Newer Version that you will have (ie as i said 11.2010...)

Now, use 1 Guide from those that you have and GO AHEAD!!!

Good Luck!

Regards!

Anyone knows where I can download these DVDs? I am using WIS/EPC 2008 I am way behind