you have to read 93c46 and post dump here
be careful if pin 7 is connected to gnd then 93c46 rotated pins
you have to read 93c46 and post dump here
be careful if pin 7 is connected to gnd then 93c46 rotated pins
Ohh..93LC46 is a electronic component..is eprom! You must desolder and read it whit a specific interface! But if you don`t have knowledge better go to a specialized service!
aha thanks
Hi, I have also same radio with OFF problem, old lc46 was unreadable, I have put another 93c46 with good dump from DK, and the radio is still in OFF mode, what am I doing wrong ?
levisdj (23rd February, 2019)
Solved, attached working 100% dump code 6432
No, dump was corrupt, it had FF FF instead of code!
Bookmarks