renault logan 2010

[belouadi]

I wanted to change odometer for renault logan year 2010 with dashboard sagem inside 93C56
original value 49260 kms
I use tachosoft 21.5 and NYO4 for change to 23000 kms.
but when I go up the dashboard in the car it shows 65532 kms
Then I took the original dump on the dashboard it always gives me 65532 kms

[tachonow]

Follow the algo from Tachosoft. Will work.

[Milkman]

Here is your dump mod to 23000

[belouadi]

Hello Milkman
I used your dump, but it doesn't work, give the same value: 65532kms

[alfabit]

...but it doesn't work, give the same value: 65532kms...

This sucks man, sure they are sick of people " correcting " odometer value. From now on, the price will rise to the sky.

[marcio1758]

I try this script with Upa!

[cosmind]

use tacho 2.1 and swap bytes

[markony79]

Renault Logane have the 25c020, not 93c56

[marcio1758]

Have both, but he could not read the eprom with the drive 93C56, destroy all other functions of the panel! Belouadi you could post a picture of the dash eprom?

[marcio1758]

That's the picture of the EPROM 25020!

[marcio1758]

That's the picture of the EPROM 93c56!

[markony79]

Marcio , you have Dp3???

[billykillkelly]

I wanted to change odometer for renault logan year 2010 with dashboard sagem inside 93C56
original value 49260 kms
I use tachosoft 21.5 and NYO4 for change to 23000 kms.
but when I go up the dashboard in the car it shows 65532 kms
Then I took the original dump on the dashboard it always gives me 65532 kms

calculate whit licznik open the dump than swap it u ll see the correct milage calculate it as swap than save as normal bites ll work

[marcio1758]

no! DM2, upa, enigma, tacho2008, seeprog, Diagcel.

[marcio1758]

I have all the manuals too if you need something send me a PM