Audi A8 D3 - Dashboard beeps after failed odometer adjustment

[cd_contact]

Hello everyone,
I tried out the VAG K+CAN 3.6 cable on my friends A8, MY 2006. It didn't work :
- tried 100 km more , no luck
- tried 100, 1000 km less - still no luck
- tried everything again and removing the baterry negative terminal - as before
I decided to leave it alone , as I've heard rumos before that it might not work with A8 and A3 dashboards.

After all my failed attemps the dashboard buzzer (gong) is continuously activated for ~ 1 minute after the car starts to move. It then stops and doesn't come back on until the car comes to a stop and then starts to move again . I've tried recoding the instrument cluster , reseting trip computer , seatbelts etc . I simply don't know what it is . No DTCs, everything seems to be ok ...it just beeps.
If anybody has any ideas , please let me know.
Thanks

[Liteace]

The "beeps" is VAG's audible warning system for low oil pressure, all your failed attemps may have damaged the dump, if thats the case you will have to re-program it

[cd_contact]

I checked all the measured value blocks from the cluster and the oil pressure switches seem to be interpreted correctly. I was expecting a visual warning as well if the part of the dump that covers warnings is damaged.
Do you know where can I get a good dump for this cluster ? I will post the damaged one here , maybe somebody can help.

Thanks for your input.

[Liteace]

Ive got the same problem on a Seat Ibiza someone tried to give it a haircut and that does the same but with no visual warning. Im sure if you post you dump here someone will be able to help you with it

[cd_contact]

Hi again ,
Sorry for my late reply . The problem fixed itself after starting the car with the key in the ignition (without keyless go). It's still a mistery to me ...