mercedes VGS programming

[weltune]

Hi ! Take a look to my previous post or write PM I know thesolutions

thanks for your advise, job done successfully

[tkinyan]

What version of DAS?
Did you start with Xentry or DAS only?

Since the DAS with 05-2010 , when I updated the ECUs, there will have a error screen after SCN coding and the DAS will close suddenly. There was no problem when code ECUs with Xentry supported vehicle. eg. W204, W207...

[nothing]

for old cars not the "212-204" we dont need xentry because when you start xentry it will dirct you to DAS .

[CarmasterAndrew]

scn online,5 minut
can only star with lizenc

Don't agree m8! Justneed a User and password to the headfquarter server. I can do SCN right now from home

[nothing]

sure if you have user\pass you can SCN ! i instelld lot of .9 bords with EHS but sometimes i insall only bord in this case i need to put the EHS number and learn it to the new bord other ways the transmission will jerk , i met also problem with the SCN after i program + SCN the DAS close always for that i renter DAS again and i do the other process ( learn DAS - learn shift postion ) manual , sometimes when the RPM sensor defect the DAS automaticly lead you to the procedures but in this case DAS store the car vin and you won't be able to log to the ETC anymore unless you do the procedures step by step .

Good luck

[cardoctor]

sure if you have user\pass you can SCN ! i instelld lot of .9 bords with EHS but sometimes i insall only bord in this case i need to put the EHS number and learn it to the new bord other ways the transmission will jerk , i met also problem with the SCN after i program + SCN the DAS close always for that i renter DAS again and i do the other process ( learn DAS - learn shift postion ) manual , sometimes when the RPM sensor defect the DAS automaticly lead you to the procedures but in this case DAS store the car vin and you won't be able to log to the ETC anymore unless you do the procedures step by step .

Good luck

Only dealers can do it.
If Nothing" can do it , please tell us procedure. How to get
Username and pass be able to SCN coodiing.
Bestregard

[mercis]

News
Back to News
05/01/2010
MB 7 GEAR RESET DEVICE VIA OBD !!!!
MEHACO

[nothing]

Hey guys , user name only for delar and mercedes work shops , other way is acess the scn from a person who have the access via specail programs , why we need to reset the ETC ? to install a used one? used one wont work like the new the new one is only 400$ .

[CarmasterAndrew]

scn online,5 minut
can only star with lizenc

Its a mistake. Not just an original Star can do it m8!

[CarmasterAndrew]

Only dealers can do it.
If Nothing" can do it , please tell us procedure. How to get
Username and pass be able to SCN coodiing.
Bestregard

Ofcourse User and Password to aftersales.i....and so on VERY IMPORTANT but my experience of working at the official MB garage, let me say, tha scn , when you exchage just the plate is at 3-rd place in the sequence of your movements