any point flashing this one as i have already used the previous release and seems to work fine
Digital Kaos - Downloads - The Box 4.57 & Loader
Thanks to the authors.
Last edited by satsmo; 22nd August, 2009 at 11:49 PM. Reason: fixed font
any point flashing this one as i have already used the previous release and seems to work fine
can this be use for the starview pvr?
hi there, does this work on the old starview boxes (i have a small silver starview box) not sure how to determine whether it's 1,2,3 ....
please help.
Hi all, am new to this forum, where can i purchase the cables
Hi satsmo just want to say thank you for all the hard work you have put in, in help us all out. The only question i have is that i have flashed two starview 2 the box with the v8.02 firware and have had no problems all works perfect. So do i need to now update them with this new 4.55 firware will i get any benifits from it all will they be ok running the v8.02 firmware. Thanks again
Last edited by runner; 6th December, 2008 at 09:06 AM.
i have also used the other fix whats the difference? do we need to do this again with this fix or will everything be ok with the other fix.
thanks to all involved in supplying the fixes.
this fix combines the previous fix with the logo so you only use the one file , so you can stay with the 8.02ee fix if you have already done so , but anyone updating from a previous image should use this one as its a straight flash into your box
this bin file is only for the sv2 known as THE BOX , it is not for any other model , so its not for the box pvr , and not for the starview 1 either. do not try using this on the wrong model or you may brick it
so this is for the box sv2 only and can be used no matter which image was in before
the correct cable to use is a 9 pin to 9 pin serial null modem crossover cable , and use a usb to serial adapter as well if you havent got a com port on your pc or lappy ( use both in that case ) , and use xp and not vista or any other os
Last edited by ramjet; 6th December, 2008 at 11:04 AM.
anyone know where to get the starview 1 firmware??
Ramjet thank you for your quick reply i will stay with the v8.20e firmware then.
Thanks again for the info.
thanks for the update satsmo1
one question,during autoscan some of the TP's show as failed is this ok?
any help appreciated
tom
Hi Can someone tell me what i've done wrong.
I flashed using 4.55 all went ok.
When i autosearched it only searched 24/24 tp's where it used to search 52/52.
Consequently only got about 1/2 the channels I used to have. Only about 1/2 of these channels work.
I entered the engineer page set emu to on and saved the key.
Is there anything else I need to do.
Thanks
Bookmarks