MagPro2

**yas200979** · 29th May, 2011, 07:51 AM

Originally Posted by ankara06

pass please..and is it compatible with clon interface ?

I tested. Work CLONE GOOD!

**barti122** · 1st June, 2011, 10:06 PM

wher buy clone interface please links

**Zwyrol** · 1st June, 2011, 10:26 PM

Work good with Ford protocol and VW PPD

**cartechnics** · 2nd June, 2011, 12:41 PM

mag pro 2 on DENSO 3L DCI 177 renault NOT WORK

**soundnavigator** · 2nd June, 2011, 02:45 PM

Originally Posted by cartechnics

mag pro 2 on DENSO 3L DCI 177 renault NOT WORK

... with original or clone tool ? If you use original, use support in helpdesk and maybe they will be resolve the problem.

Best regards.

**eduardo74** · 2nd June, 2011, 05:40 PM

Today tested on Renault Scenic II edc16c3 not working, cannot recognize ecu?

**ominimicu** · 2nd June, 2011, 09:35 PM

So anyone offered you the titanium ?

**mimmo2011** · 2nd June, 2011, 10:59 PM

Originally Posted by barti122

wher buy clone interface please links

HELLO.
I HAVE BOUGHT THE CLONE SITE FROM ITALIAN.
GOOD WORK
MADE IN ITALY

**mec** · 3rd June, 2011, 12:29 PM

hi,
i have original magpro2 , but i not pay for update

if have somebody update and drivers
my last version is 3,0

thx,mec

**yellowstilo** · 5th June, 2011, 02:27 PM

version 4.2 is posted here, including the RAR password....

**cartechnics** · 6th June, 2011, 05:08 AM

Originally Posted by soundnavigator

... with original or clone tool ? If you use original, use support in helpdesk and maybe they will be resolve the problem.

Best regards.

clone with 4.2 program

**cartechnics** · 6th June, 2011, 05:12 AM

Originally Posted by cartechnics

clone with 4.2 program

and not work with renault edc 16 i confirm
not work with giulietta (on write read ok 25 min)
and not work with ME7.5 ibiza 1.8 20VT
not work on DENSO velsattis 3L V6 DCI
WHY ??????
test on 206 2L HDI 90 all good
306 HDI 90 all good
golf 4 tdi 100 all good

i have test all speed slow medium fast

**yellowstilo** · 6th June, 2011, 06:10 AM

i used a clone magpro2 with the 4.2 software (copied registration files) on my Fiat Stilo 1.6 with IAW5NFT1 ecu.
It reads o.k. but refuses to accept any of the writing speeds and only sometimes it generates a message ""invalid key" after trying to write.
I choose the correct family with the 5NF ecu , in the meanwhile i have learned these ecu's are a real pain to write....(tried Magpro2, KWP2000+, MPPS and Galletto clones)
The only tool which managed to write up to 100% was the Galletto 1260 but that one generated a checksum error at the end and blocked a testecu.
Anyone has any suggestions for writing this ecu successfully?
As i'm only a hobbyist and only use this for my own car the real tools are no option for me...

**rappttor** · 6th June, 2011, 10:50 AM

as i said, i have one briked on my table, the event happend after a writing process with a clone galetto, 99% and after cks error. it came in this state to me and i never was able to restore it with any tools i tryed. inside is a micromotorola and as far as i know it has a second cks on the file, i still dont know why, maybe related with the eeprom.
i dont know if you can get it in boot mode, and dont know any tool to be able to write so, unfortunatelly.
i'm interested in this subject, keep me posted if you find something.
br

**cartechnics** · 6th June, 2011, 06:06 PM

i have test with mag pro 2 4.2 clone on FORD focus 1.6 TDCI 109 HP i have read ok
mod ok
but cheksum error
i have remake the cheksum with ols
not work mag pro cheksum error ??
in winols cheks ok
in titanium cheks ok
???
the mag pro2 software has encoured an error in cheksum and dont want program
sorry for my english i am french

Thread: MagPro2

Thread Tools

Display

MAGPRO2

Bookmarks

Bookmarks

Posting Permissions