MagPro2

**DemolitionMan** · 4th July, 2011, 07:45 AM

hi -.. pass pm

please ...... thanks

**todos** · 17th July, 2011, 06:50 PM

Hello, can send me the pass thanks

**Mario32** · 17th July, 2011, 07:07 PM

Can I have the password.

Thanks in Advance.

**albematty** · 18th July, 2011, 03:08 PM

Hello, can send me the password thanks

**scarymistake** · 18th July, 2011, 03:18 PM

For the last time
For those who can not read

http://www.digital-kaos.co.uk/forums...ml#post1110858

**edc** · 20th July, 2011, 06:26 PM

what about magpro2 clone and vag edc16 ecu's ... any problems ?

**edc** · 20th July, 2011, 07:04 PM

and one more thing : please give some link to a good,tested clone of magpro2 to buy ... can be on PM ...

**filoxio77** · 20th July, 2011, 11:24 PM

Can I have the password.

Thanks in Advance.

**yellowstilo** · 21st July, 2011, 06:14 AM

did you read this post with your eyes closed ??

please READ !!

**powertdi** · 23rd July, 2011, 11:06 PM

Is the anyone tested clone of magpro2 with MED17 or EdC17 on TP or UDS protocol? I not sure it will work. Comfirm please.

**bazare** · 24th July, 2011, 09:51 AM

magpro2 base don't have edc17 in car list ... so it's impossible to work. Buy the original x17 and will do the job flawlessly. Always buy original tools if you don't want troubles.

**kti1970** · 24th July, 2011, 09:43 PM

pass please pm
thanks ......

**J_amb_o** · 25th July, 2011, 10:27 PM

I have seen the Magpro2 clone, but is there an X17 module clone?

**filoxio77** · 25th July, 2011, 11:01 PM

Hello guys I have a problem with the MAGPro2 clone, I successfully installed the software v4.2, drivers installed correctly and when I click on data after 3 seconds gives me an error "error step 3", the h tried everything, changing speeds, driver of the car, etc. .... you know nothing but help me please?