MPPS Repair

[gbratk]

Can you try it and let us now

Procedure:
1. Install MPPS V5.0.1.10
2. Run Patch MPPS V5.0.1.10 Patch
3. Put in the usb (from interface)and run FirmwareUpdate.Exe then MppsUpdate.exe
4. Finaly interface works

DO IT AT YOUR OWN RISK!!

Before



After

Tested with ..234 clone. Works perfect. Thanks

But I have one problem. After few days and few interface conections to computer, the program dont start any more. I have to uninstall it and install it again, and it'll work day or two and then the same again.

Does someone have solutin to this? Can anyone help me?

Thank you

[autodiagnostic]

Hello guys.

I looking for all symptoms.

Looking for information on mpps what happens if I run a new version with cloned cable.

After start new software firmware is reflashed.

Questions:

1. detect system cable or not ?

2. if detect what ID and PID show ?

3. what S.N. show ?

4. e.c.t.

Thank you for all informations

After answer and more info i help you how repair or update c.

It may damage the clone cable if you run a new version, or maybe it will don't work.
After start new software firmware is reflashed, it will not detect system cable, not detect any ID, not show S.N

[autodiagnostic]

Tested with ..234 clone. Works perfect. Thanks

But I have one problem. After few days and few interface conections to computer, the program dont start any more. I have to uninstall it and install it again, and it'll work day or two and then the same again.

Does someone have solutin to this? Can anyone help me?

Thank you

too bad, not work stable, the software has som flaw

[obnchip]

Hi!

I have an updated mpps to v8.Exist crack or patch for v8?

[gbratk]

too bad, not work stable, the software has som flaw

strange cos I have the same problem with old software, so I think that is the problem somewhere else. I also try on other computer and the same thing.
So I really don't know what to do.

[blacktoy]

I have a Problem with a MPPS V10 or V5:

-communication via KLine OK (EDC15,EDC16,MED7.5)

- when trying a CAN Bus ECU (Audi A4 EDC16, BMW E65 FL 535 EDC16) i get the error message "Ecu not found" and then "internal hardware error. Further HW Info under "Version information" change from "AMT Tech" to "Version E".

Any Ideas?

br

[kenancatli]

Originally Posted by autodiagnostic
too bad, not work stable, the software has som flaw

hello
maybe bad touch usb or pcb interface? open and look

[kenancatli]

I have a Problem with a MPPS V10 or V5:

-communication via KLine OK (EDC15,EDC16,MED7.5)

- when trying a CAN Bus ECU (Audi A4 EDC16, BMW E65 FL 535 EDC16) i get the error message "Ecu not found" and then "internal hardware error. Further HW Info under "Version information" change from "AMT Tech" to "Version E".

Any Ideas?

br

hello friend
update? mcu maybe damage or bad dump
best regards

[blacktoy]

i tried 2 different mcu with a fresh v4 dump
and the same problem exist

dump should be OK

[kenancatli]

try on other pc?
and usb driver good installed? CAN BUS damage?
best regards

[blacktoy]

i tryied 2 different pcb's with different parts

is it possible that the dump is damaged only for can bus?

drivers are ok (from C:/mpps/device drivers (V10)

[kenancatli]

old version mpps install and again try
or buy new mpps
good luck

[lulu2003]

wich version ?

the v8 you mentioned.

[gzk]

the v8 you mentioned.

here the file

[noriginal]

It may damage the clone cable if you run a new version, or maybe it will don't work.
After start new software firmware is reflashed, it will not detect system cable, not detect any ID, not show S.N

it is normal with a bad quality clone