MPPS Repair

**mishu_b** · 29th April, 2012, 11:19 AM

...
my dear friend

The guy who asked for support was asking for solution to revival the tool - not the sw.

What you have uploaded it is the original sw nothing else more. For him support he needs program the uC proper.

As far as I read / know there is no solution only by sw to stop the counter, unless maybe you know something which I do not know and I would like to know from you if there is such solution!!!??

Just for the record: you have uploaded original sw not sw with solution for counter stop/revival.

**daz944** · 29th April, 2012, 01:34 PM

Originally Posted by mishu_b

...
my dear friend

The guy who asked for support was asking for solution to revival the tool - not the sw.

What you have uploaded it is the original sw nothing else more. For him support he needs program the uC proper.

As far as I read / know there is no solution only by sw to stop the counter, unless maybe you know something which I do not know and I would like to know from you if there is such solution!!!??

Just for the record: you have uploaded original sw not sw with solution for counter stop/revival.

I'm new to this so i don't have the answers you want to be honest. All i know is that I have my new mpps v12 (clone) which does NOT count down at all. if it's something in the cable or something in the V12 software, i just don't know. I was only trying to help.

**ecutuners** · 29th April, 2012, 03:07 PM

Counter is disabled in the mpps cable not software

**mishu_b** · 29th April, 2012, 06:34 PM

...
as I said - the solution it is in the fw written into uC not into the sw, as far as I know / read.

atb

**eiemax** · 7th May, 2012, 06:59 PM

Hello all. I have an ex mpps v3, which due to wrong update with a V8 version of the original, is now dead. Let me explain, is that is not recognized, but in device manager, instead of appearing as amt flash, appearing as a peripheral interface uman, so with any version you want to update, is not seen no device. Can you tell me please how to restore it?

**ssilvviu** · 24th August, 2012, 07:26 PM

Can somebody share a uC dump?

**rsibiza** · 24th August, 2012, 09:54 PM

Originally Posted by eiemax

Hello all. I have an ex mpps v3, which due to wrong update with a V8 version of the original, is now dead. Let me explain, is that is not recognized, but in device manager, instead of appearing as amt flash, appearing as a peripheral interface uman, so with any version you want to update, is not seen no device. Can you tell me please how to restore it?

Need update mcu...as you can read all along this threat...I ts death mpps clone...

**rsibiza** · 24th August, 2012, 09:55 PM

Originally Posted by ssilvviu

Can somebody share a uC dump?

As i know it s no more autorised to post dumps here...so..

**quiksilver666** · 23rd January, 2018, 07:06 PM

did you solved this?

**quiksilver666** · 23rd January, 2018, 07:06 PM

Originally Posted by naruto12

Hi there Scarymistake, i try that on my win7 32bit, and after all the procedure, when i open after the pacth the mpps.exe it gives me an error of cant wright on setupapi.dll...Can you help me on that_?
On Xp Mod it works good
Regards

did you solved this?

**quiksilver666** · 23rd January, 2018, 07:08 PM

Originally Posted by scarymistake

i have only win xp
try dis
install program (from me)
1. delete original file "Mpps.Exe" from inst directory
2. extract then rename the attached file to mpps.exe and copy it to the inst directory
3. run FirmwareUpdate.Exe then MppsUpdate.exe

DO IT AT YOUR OWN RISK!!

and let us now but i only test it on win xp sp3

i have the same problem but i cant download your patch...

**dist01** · 24th January, 2018, 02:43 PM

Any solution on MPPS V18 ECU NOT FOUND?

**teerak2uk** · 24th January, 2018, 04:34 PM

Originally Posted by dist01

Any solution on MPPS V18 ECU NOT FOUND?

More info needed

Car
Year
Make
Model
Ecu #'s

How you are trying to connect

**dist01** · 24th January, 2018, 08:14 PM

every car edc16u1 edc16c and etc

Sent from my iPhone using Tapatalk

**busho** · 21st September, 2018, 12:14 AM

Dear Friends,
I need for MPPS V16 clone - schematic.

This are the IC chips inside:

U1 - C8051F340 - Full Speed USB Flash MCU Family
U2 - SJA1000T -- Stand-alone CAN controller
U3 - C32R -- voltage regulator 3,2 Volt - ST LDK130C32R
U4 - А1040А = TI SN65HVDA1040A-Q1 EMC-Optimized High-Speed CAN Bus Transceiver
U5 - E5R -- ???
U6 - empty
U7 - 8S103F3P6 -- MCU STM8S103F3
U8 - L9613 -- Data interface / 8 pin

I have problem with the wrong voltage.
My MPPS V16 show aprox 30 Volts. This is not real.
I think that my problem is with wrong or not correct resistors.

Please post here schematic or/ and PCB for MPPS V16 clone. Many people will be happy!

Thank you! Sorry for my bad English!!!

Thread: MPPS Repair

Thread Tools

Display

The Following User Says Thank You to ecutuners For This Useful Post:

Bookmarks

Bookmarks

Posting Permissions