pin code from dump free here

**vagtacho** · 18th January, 2017, 10:38 PM

Are you sure on this, cause this is FFFF and is maximum possible number of the login code.
I saw this with some of my tools but does not work. Is there another tool that could work?

**vagtacho** · 18th January, 2017, 10:42 PM

Are you sure on this? It is just maximum number that is possible $FFFF.
I saw this with some of my copied tools but does not work.

**doctore** · 18th January, 2017, 11:23 PM

from your dump i see this ,and maybi not good
VIN 7M3920840GV3.0
pin 65535

**mikajna** · 19th January, 2017, 02:14 PM

Originally Posted by vagtacho

Can someone decode the pin code for Sharan II 2001 7M3920840G dashboard VDO V30.
I tried Chinese vagtacho 3.01 but did not work. I want to learn on additional key via VCDS 16.8.4.
Is the dashboard login code also the immobilizer login code for this "old" car?
Immo is 7M3953257 and I still don't know if Immo 2 or Immo 3.
Thanks.

Attachment 422416

Sharan does not have PIN code in cluster, you have separated IMMO box, its behind cluster...you can easily find him

**vagtacho** · 19th January, 2017, 08:35 PM

Thanks a lot. That is perfect explanation why we all don't find it in cluster. Mileage I found already.
Which tool could you recommend to dump immo EEPROM and find login without disassembling immo box?
Or must I go the hard way with clamp and direct read out?
Can I try vagtacho cracked v5.0 on my Chinese v3.01?
I heard that it will destroy Chinese v3.01 hardware if Iwould try.

Great forum and thanks!!!

**doctore** · 19th January, 2017, 08:48 PM

black immobox siemens remove and open use xprog or upa programmer

**TethiS** · 21st January, 2017, 12:06 PM

Hi,
would pe bossible to get VIn and PIN from this dash dump? (A3 2005 8P0-920-930 Q)
(not sure if it's virgin or not)

8P0920930Q.zip

**mikajna** · 22nd January, 2017, 02:52 PM

Originally Posted by vagtacho

Thanks a lot. That is perfect explanation why we all don't find it in cluster. Mileage I found already.
Which tool could you recommend to dump immo EEPROM and find login without disassembling immo box?
Or must I go the hard way with clamp and direct read out?
Can I try vagtacho cracked v5.0 on my Chinese v3.01?
I heard that it will destroy Chinese v3.01 hardware if Iwould try.

Great forum and thanks!!!

You need to read eeprom directly, remove eeprom or with clamp, than make key with effi, transponder is ready to start car without changing eeprom content. Good luck, its 24C04 Valeo immo box if your transponder is ID44 as usual