Andy,
Looks like you already have the line in the right place.
If you haven't entered it before you may have loaded an image which already have crossepg integrated, there are a few about!
cheers,
M
my file looks like: so where do i put /usr/crossepg/crossepg_epgmove.sh
#!/bin/sh
prefix=/usr
exec_prefix=/usr
datarootdir=${prefix}/share
if [ -x /usr/bin/showiframe -a -f /usr/share/backdrop.mvi ]; then
/usr/bin/showiframe /usr/share/backdrop.mvi
fi
# hook to execute scripts always before enigma2 start
if [ -x /usr/bin/enigma2_pre_start.sh ]; then
/usr/bin/enigma2_pre_start.sh
fi
if [ -d /home/root ]; then
cd /home/root
fi
LIBS=/usr/lib/libopen.so.0.0.0
#check for dreambox specific passthrough helper lib
if [ -e /usr/lib/libpassthrough.so ]; then
LIBS="$LIBS /usr/lib/libpassthrough.so"
fi
/usr/crossepg/crossepg_epgmove.sh
LD_PRELOAD=$LIBS /usr/bin/enigma2
# enigma2 exit codes:
#
# 0 - restart enigma
# 1 - halt
# 2 - reboot
#
# >128 signal
ret=$?
case $ret in
1)
/sbin/halt
;;
2)
/sbin/reboot
;;
4)
/sbin/rmmod lcd
/usr/sbin/fpupgrade --upgrade 2>&1 | tee /home/root/fpupgrade.log
sleep 1;
/sbin/rmmod fp
/sbin/modprobe fp
/sbin/reboot
;;
*)
;;
esac
Andy,
Looks like you already have the line in the right place.
If you haven't entered it before you may have loaded an image which already have crossepg integrated, there are a few about!
cheers,
M
DM800 Pro clone Merlin 3If a post was helpful use the button
DM800 Pro clone Merlin 3If a post was helpful use the button
Hi Danny.
I'm using an icvs gp3 image. I have gp3 plugin and tunisiasat plugin installed.
I currently have my crossepg set to HDD. I have installed a 4gb usb pen in the back of my dm800 and it is recognised fine. my picons are installed on there and they work great.
However..... I do not get a usb option in the configure crossepg storage device.
I can also not find the /usr/crossepg/crossepg.configure as you suggest.
Any help appreciated.
cheeers,
M
DM800 Pro clone Merlin 3If a post was helpful use the button
it works and dont know how
Thanks for your replies though
I dont have any option to change file to epg.dat
Where is this? Im using the new ramaHAMMER gemini/vix image by the way.
hi iv been getting my self a dm 800 hd. i must say good bit of kit. still getting to know the box.
im getting harddrive installed by a friend, and im wondering about the epg. my box is running Newnigma2 v3.1.1 firmware i dont know if any one knows this image, some people say that this epg download is in the plug ins, dose any one know if its in this image and how to go about installing it. dose any setting need to be changed? last thing i want to do i break the box.
thanks for reading guys
can any 1 help on this question????
hi iv been getting my self a dm 800 hd. i must say good bit of kit. still getting to know the box.
im getting harddrive installed by a friend, and im wondering about the epg. my box is running Newnigma2 v3.1.1 firmware i dont know if any one knows this image, some people say that this epg download is in the plug ins, dose any one know if its in this image and how to go about installing it. dose any setting need to be changed? last thing i want to do i break the box.
thanks for reading guys
Last edited by darguewin; 11th May, 2011 at 06:12 PM.
im running nwenigna 3.2.2 and iv followed the post down to a t to install crossepg and it just isnt working. it goes through all the search and downloading but it just wont bring up epg. any 1 help!!!!!!!!!!!
have you tryed
blue button > plugins
or
blue button > addons
there is other epg sources in the plugins
but cross epg works on most enigma2 images.
there are others avaliable on the plugin servers but the ones that save the epg data to your flash / ram can fill up your boxes flash / ram and cause the box to crash (the green reboot screen)
DM800 Pro clone Merlin 3If a post was helpful use the button
i just cant get it working. iv tryd all the epg out of pluggins and wont work. i tryed to re flash but all i got was check tuner config. tuner was set up as it should be but just kept comming up with that. so just had to put this newnigma2 back on. my tuner is rev m.
In newenigma the one to use is the xmltvimport located in the newnigma2 services from the blue button, once downloaded press blue button and select epgimport and set up your sources (blue button) and then manual (yellow button) and let it scan for your epg sources, it will then ask you to reboot and bobs your uncle.
But i found that there has been some issues with the rytec server and it was playing up a bit so i chnged to crossepg, but you will need to add that plug in from the Tspanle plugin, once the Tspanle is set up on your box you can find the crossepg in addons / plugsins, and it works / set's up more or less like the xmltvimport, and it is working a treat.
ITgate TGM220 (swapable tuner), Dreambox 800 pro, Dreambox 500c x 2, DBox, Popbox media player.
Bookmarks