160D0WQ

**markony79** · 9th March, 2011, 07:34 PM

I need some of this,
where is posible to buy?
or can change with 35080?

but I need 100% knowledge or with experience

Thanks

**carbandit** · 9th March, 2011, 08:43 PM

smelecom uk sell them i believe

**marcio1758** · 9th March, 2011, 09:29 PM

Originally Posted by carbandit

smelecom uk sell them i believe

with the 35080 will not work, your database is half the 160dowq, it is double in size, it is necessary to replace the same or 35,160, or delete your! R270 is able to do this!

**tachonow** · 9th March, 2011, 09:45 PM

Also Codiprog has on its menu erase option for this chip.

**markony79** · 9th March, 2011, 09:51 PM

Originally Posted by tachonow

Also Codiprog has on its menu erase option for this chip.

I have Codyprog, but I am afraid when do this,
becouse on D80D0WQ sometimes can not errased good, and must change with another

becouse off that I need one of this to have in my reserv..

**smartymarti** · 9th March, 2011, 10:18 PM

160D0WQ is same as 35080 just read and put onto a new chip should be no issues

**ION CRISTI** · 9th March, 2011, 10:25 PM

i replace m35080vp and work succesuful. in dash corsa d it is

**milesbetteroff** · 9th March, 2011, 10:43 PM

Hi guys well a lot of info here some good here is my input I have r270 and have done these cars 160's take up to am hour to erase but I have used 35080 as replacement it did work as there is no info in second half of eeprom have only done it once just so I had a spare chip that I could have ready for next job so not waiting about for chip to erase hope this helps cheers

**markony79** · 9th March, 2011, 10:44 PM

Originally Posted by ION CRISTI

i replace m35080vp and work succesuful. in dash corsa d it is

I was do 2-3 Corsa D and never found this 160D0WQ
in Corsa is D80D0WQ

**smartymarti** · 10th March, 2011, 09:49 AM

Originally Posted by markony79

I was do 2-3 Corsa D and never found this 160D0WQ
in Corsa is D80D0WQ

3 then 6 then vp etc
there just the next geberation chips ie

**breno.monteiro** · 10th March, 2011, 04:42 PM

see in carprog.lt , the new interface superprog work 160d0wq

**billykillkelly** · 10th March, 2011, 07:00 PM

replace whit 38080 .... no worry

**T72** · 10th March, 2011, 09:14 PM

Originally Posted by billykillkelly

replace whit 38080 .... no worry

have you ever saw dump from 160D0WQ?

**markony79** · 11th March, 2011, 07:51 AM

I found this for 60e +post 30e from Italy
Its very good site,have hardware for dashes

Minitools Product - ERASER FOR 35080/M35080/35160/M35160 EEPROM