Laguna 2 1.9dci EGR OFF and svbl

**P2XA** · 31st March, 2011, 07:11 PM

Hi!Somebody help in remap laguna 1.9dci EDC15C2
I think that egr map is 73da0!?
SVBL need to increasein 30%?

**P2XA** · 31st March, 2011, 07:18 PM

dump here:

**carmageddon** · 4th April, 2011, 04:10 PM

on edc15 try with set on map 73DA0 all value @ 11000...if you dont have limp mode the solution is this...otherwise need disable the control but i can not now

**P2XA** · 4th April, 2011, 05:03 PM

Originally Posted by carmageddon

on edc15 try with set on map 73DA0 all value @ 11000...if you dont have limp mode the solution is this...otherwise need disable the control but i can not now

EGR closed but while driving limp mode;need to disable control...

**P2XA** · 5th April, 2011, 02:10 PM

Anybody help me?

**monitel_service** · 6th April, 2011, 06:13 AM

tys is your file

**gezame** · 6th April, 2011, 11:51 PM

Originally Posted by monitel_service

tys is your file

Hi
Danger, bad checksum in file.
Regards.

**monitel_service** · 7th April, 2011, 05:22 AM

What software use to write ?
Normally your software need to make the CKS
I can be calculated manually CKS.

**gezame** · 8th April, 2011, 02:04 AM

Originally Posted by monitel_service

What software use to write ?
Normally your software need to make the CKS
I can be calculated manually CKS.

Hi
I do not problem, i use cmdflash original, calculate checksum in all ecu suported, edc15, siemens, delphi,etc, etc.
but others, using other interfaces.
Cmdflash only makes writing EDC15 checksum, etc.
Regards.

Thread: Laguna 2 1.9dci EGR OFF and svbl

Thread Tools

Display

Laguna 2 1.9dci EGR OFF and svbl

dump

Bookmarks

Bookmarks

Posting Permissions