Edc16c3 with xprog m

**antibisic** · 30th April, 2011, 11:48 AM

which option you select?can you read with x-prog full dump(mpc,ex flash,eprom)or you have to read one by one?
Thanks

**miha99** · 30th April, 2011, 09:24 PM

With xprog-m you read one by one, depend on how you select in devices...

**choro** · 2nd May, 2011, 02:45 PM

Originally Posted by zebbon

Connection to xprog m.....100 percent working!!!

Yes working 100 %

**micromax** · 3rd May, 2011, 05:55 PM

work 100%. now i buy this adapter:
Adapter MPC5xx do programatora xprog-m :: Sklep@AutoDiag.pl

work fine, and wait for next adapter :
Adapter HC(9)08 do programatora xprog-m :: Sklep@AutoDiag.pl

**stevan** · 4th May, 2011, 10:02 PM

of course remember that xprog not calculate checksum,must do it with winols or similar soft.

**grinovsky** · 6th May, 2011, 12:07 PM

Originally Posted by zebbon

with xprog m
Renault Trafic 2.0 DCI 2007 EDC16c3
MPC562MZP56
M58BW0160B70TF eeprom 95320

I think that xprogm can't read MPC562
the connections are right but if you see picture attached you will see too that XPROGM don't read MPC562
i read MPC555 without probleme with xprogm but can't write

**vwphun** · 6th May, 2011, 01:25 PM

MPC561-2 don't have any internal flash eprom. You can read external flash eprom and eeprom.

**P2XA** · 8th June, 2011, 02:21 PM

After reflash ecu edc16c3 with x-prog : no communication with ECU...

Thread: Edc16c3 with xprog m

Thread Tools

Display

Bookmarks

Bookmarks

Posting Permissions