Vito DPF OFF

**mati-rk** · 28th April, 2011, 05:04 PM

Hi all on DK!
Please help me with DPF OFF on Mercedes Vito 115CDI. I done it with ecusafe, car started ok gone 400km and then no fault code is shown but I can accelerate only to 3000 rpm. I started again and car goes fine, but every 400 km the same fault. Anyone help? Here is my dump

**mercis** · 28th April, 2011, 05:38 PM

i think,your dpf is full

**mati-rk** · 28th April, 2011, 07:32 PM

no it isn?t because i removed dpf and KTS says me 10 percent pollution

**tuningschool** · 28th April, 2011, 08:47 PM

is very difficult to delete dpf on mercedes vito ...

**mati-rk** · 28th April, 2011, 10:55 PM

any idea how to do this job?

**mati-rk** · 9th July, 2011, 10:11 AM

Hi all. My problem with Vito is back. Customer done some about 15000 km and car is now in limp mode only 3000 rpm. Fault memory is clean DPF pollution is 0 percent and check engine light is off. What can I do with this? Another Vito whitch I have done with Ecusafe is OK. I don?t know what?s wrong. Help please. Maybe differential pressure sensor problem?

**andreic** · 6th September, 2011, 10:22 AM

Hello,
I also have a Vito with this problem, DPF off made with ecusafe. Did you manage to solve it?

**mati-rk** · 6th September, 2011, 09:54 PM

Originally Posted by andreic

Hello,
I also have a Vito with this problem, DPF off made with ecusafe. Did you manage to solve it?

Yes I solved it. DPF OFF with ecusafe was good. The problem was differential pressure sensor. I fitted new sensor, reflash ECU with ecusafe file and everything is ok. Car after this have driven 35000km till now and still everything is ok.

Thread: Vito DPF OFF

Thread Tools

Display

Vito DPF OFF

Bookmarks

Bookmarks

Posting Permissions