ABS Module Programming, I just converted my Audi to manual

[nynhp]

I just converted my Audi To Manual from automatic, but my ABS/ESP module is still looking for a connection to the TCU, is there anyway i can reprogram the ABS module so i can have my ABS working again and for it not to look for my TCU?

[Ashraf6119]

Hi

More info about your car would be helpful for example .......What Year it is, Petrol or, Diesel......... A2,A3, or A4 and so on...........But, to help your self you can have a quick look in here...................

You will also need to change the software coding in Engine ECU from Auto to Manual...........


Diagnostic Procedures - Ross-Tech Wiki

[vey81]

Hi

More info about your car would be helpful for example .......What Year it is, Petrol or, Diesel......... A2,A3, or A4 and so on...........But, to help your self you can have a quick look in here...................

You will also need to change the software coding in Engine ECU from Auto to Manual...........


Diagnostic Procedures - Ross-Tech Wiki

hi
I agree with Ashraf6119
coding unit is the base, look at ross-tech procedures to individual cars. Then, using a VCDS or VAS to recode.

good luck

[nynhp]

its a 2003 Audi RS6 4.2 Gasoline

[sherl645]

Post a full autoscan from the car.
Ronan

[vey81]

try
ABS coding
06395
06595
06695

[VTL511]

do you happen to know the Login code for the ABS module?

[nynhp]

any advice? still no ABS here

[lupu_sandu]

What brakes do you have?
Follow these intructions (depends what ABS you have in car):
http://wiki.ross-tech.com/wiki/index...28Bosch_5.7%29
or
http://wiki.ross-tech.com/wiki/index...EDS/ASR/ESP%29

[nedved59]

Hi , i do it twice with A 4 1.8 T , i change flash of engine s ecu with a manual flash with kwp2000 , you should try

[ahadi]

Remove the TCU and recode ECU ,thats all .

[nynhp]

dont work