Experience with Autocom

[kouvas]

DiagActivator.exe

[hornhunter]

Recently I bought Autocom Trucks clone. Today I went to try on MAN TGF. It went like this:

I came, I plugged it in, I saw white smoke, I unplugged it.

Very interesting diagnostic, I did not found any error on the truck except on my device :-(

The happy thing is I repaired it very quickly and tested it on 30V later and all went ok. I can tell You that clone is good for cars but for trucks no....

[Amine13]

Recently I bought Autocom Trucks clone. Today I went to try on MAN TGF. It went like this:

I came, I plugged it in, I saw white smoke, I unplugged it.

Very interesting diagnostic, I did not found any error on the truck except on my device :-(

The happy thing is I repaired it very quickly and tested it on 30V later and all went ok. I can tell You that clone is good for cars but for trucks no....

What was wrong with interface; which element was burnt ?

[baner]

What was wrong with interface; which element was burnt ?

My bet that yellow 47 mf capacitor is burned. And maybe a green fuse on same PCB with relays.

Regards and respect!

[hornhunter]

My bet that yellow 47 mf capacitor is burned. And maybe a green fuse on same PCB with relays.

Regards and respect!

That's wright, that was burned...

[hornhunter]

How to pair Autocom device over bluetooth, what is the pass key ?

[Meat-Head]

How to pair Autocom device over bluetooth, what is the pass key ?

if you read more often, you will see this has been asked and snaswered already - and confirmed - twice

[hornhunter]

if you read more often, you will see this has been asked and snaswered already - and confirmed - twice

I read very often, I must missed that somewhere. Thank You for Your answer...

[baner]

I read very often, I must missed that somewhere. Thank You for Your answer...

If you miss that, initial pairing bluetooth passkey is "0000" (four zeroes)!

And I think that our mate, Meat-Head has right, it was mentioned here in forum, but I think that was wrong info with passkey just of one zero "0", anyway

Regards and respect!

[Meat-Head]

If you miss that, initial pairing bluetooth passkey is "0000" (four zeroes)!

And I think that our mate, Meat-Head has right, it was mentioned here in forum, but I think that was wrong info with passkey just of one zero "0", anyway

Regards and respect!

http://www.digital-kaos.co.uk/forums...ml#post1178394

[hornhunter]

Found that post in the meanwhile, thank You all for Your help...

[paro44]

Recently I bought Autocom Trucks clone. Today I went to try on MAN TGF. It went like this:

I came, I plugged it in, I saw white smoke, I unplugged it.

Very interesting diagnostic, I did not found any error on the truck except on my device :-(

The happy thing is I repaired it very quickly and tested it on 30V later and all went ok. I can tell You that clone is good for cars but for trucks no....

So the obd-cable was wired right?
I read here at dk that half of the truck-cables from china have wrong wiring. Was that the reason for smoking? Or only bad components on pcb?

[hornhunter]

OBD is ok, the problem is adapter cables, they are all wrong. I went yesterday to test it on VOLVO and MAN trucks, but did not do anything because 8 pin Volvo cable have inverted power and ground and also 12 pin MAN cable have inverted power and ground, please be careful when You use these cables.

PLEASE can somebody give me the pinout for VOLVO 8 pin truck cable. I gave You all the pinouts I had but this one I do not have and really need it. Thanks in advance

[baner]

OBD is ok, the problem is adapter cables, they are all wrong. I went yesterday to test it on VOLVO and MAN trucks, but did not do anything because 8 pin Volvo cable have inverted power and ground and also 12 pin MAN cable have inverted power and ground, please be careful when You use these cables.

PLEASE can somebody give me the pinout for VOLVO 8 pin truck cable. I gave You all the pinouts I had but this one I do not have and really need it. Thanks in advance

Hi mate,

please check this pinout:


volvo truck 8 pin.jpg


Please drop a note did you have any success with connecting to Volvo Trucks with Autocom.

Regards and respect!

[STK340]

OBD is ok, the problem is adapter cables, they are all wrong. I went yesterday to test it on VOLVO and MAN trucks, but did not do anything because 8 pin Volvo cable have inverted power and ground and also 12 pin MAN cable have inverted power and ground, please be careful when You use these cables.

PLEASE can somebody give me the pinout for VOLVO 8 pin truck cable. I gave You all the pinouts I had but this one I do not have and really need it. Thanks in advance

mybe that,
same request like baner,
regards