This MCU is for Ford protocol
Change this and your autocom will work on Ford cars non-CAN.
This method is tested by a friend.
Datasheet and picture of MCU attached:
Thanks lupu_sandu, you are very helpfull. Do you know where from we can buy that MCU? So far I couldn't find anywhere...
Have you tried RS and good old fleebay?
I know, look here:
BMW TIS - OBD socket Standardised layout of the OBD socket Standardised pin assignment Pin 1:
Some autocom I have work on pre 2004 and after 2007 BMWs, bot no way on E60 and E90 from 2004 to 2007!
Last edited by alfy; 22nd December, 2011 at 09:36 PM.
Which model of shitroen () M-H?
Just start, and all come itself!!!!!!!
One of the Guys I know tested on Peugeot 307 2003, and the problem was that Autocom didn't communicate with any module; so please get test for this model, fault XS evo interfaces were used not to scan it too, something special for PSA cars related to Their VAN protocols. PLease make full ecus tests on this model to confirm Autocom working on them.
Just start, and all come itself!!!!!!!
I would sure try m8 but I think will be a while before I will come across one. Today tested successfully on ShitroenJumpy year 2007 diesel, BMW 520 petrol year 2000, Ford Fusion diesel 2004 (probably on CAN protocol) also tested on Focus diesel year 2000 but only worked on ABS and another 1-2 modules (can't remember which ones) not working on ecu and other modules.
My Autocom works fine with Citroen.
Tested with:
C5 2003 2.0HDI
Berlingo 2.0HDI and 1.6 Petrol
C3 1.4 HDI
Peugeot 307 1.6Hdi and 2.0HDi
But it doesn't works with honda Jazz old model- tested on 2 cars.
It must be problem sowewhere in electronic,and must be couple producers of Autocom's.
------------------------------------------------------
Work is a primitive way to spend Your free time.
F.Kiepski.
Bookmarks