Experience with Autocom

[Meat-Head]

I find it.. thanks
Now I tested bmw 530 Diesel E39 530D DDE 4.0 and can not find Ecu engine.. all another ecu yes

Maybe is problem in car, becouse another bmw with DDE 4.0 work

Eye we had a chap in the other week, bmw 3 serioes 1.9 petrol, looking like 3 dud ecu's 4th worked.

[flavyus1987]

BMW with DDE5 workted on mine.Problem on old ford.But it's not a problem, i don't like fords

[ioanrokos]

BMW with DDE5 workted on mine.Problem on old ford.But it's not a problem, i don't like fords

Did you try to change resistors?

[flavyus1987]

No, i don't change anything.The rezistor on mine PCB is 30 ohm.
I tested on manycars and worked ok: opel like corsa.astra from 2000-2007,fords 2006,alta 156,golf3, polo '97,MB c220 2002, mb A class,toyota FJ = hummer , renault espace/megane,bmw 320 from 2005 with dde5, etc...
Only problems on old ford.I waiting to test on bmw series 5 and 7.
A friend of mine have autocom with 390 ohm rezistors, but his working on ford and not working on BMW DDE5, mercedes C220 from 1998 and others.

[ioanrokos]

have you test it on BMW E60?

[flavyus1987]

No, i waiting to catch one to test it.If working, i'll never change the rezistors, if not i'll change that rezistors.

[viki300]

Hello all after succesfully install of 2011.3 software i try to flash firmware i just hook it up to obd adapter and plug 12volts to it and start flash and far beyond half way it stop and start complaint that voltage wrong or com port wrong or usb cable not connect and if i try again it start flash and stops right away with same story voltage wrong ... should i try to connect to car and try again or is going to gone autocom

[mick711]

You plug 12 Volt with Battery ?
With a clone i think Autocom don't send to you new for free
Buy a new clone or find all files needed and unplug some chip and flash with programmer .

[autocargo]

Hello all after succesfully install of 2011.3 software i try to flash firmware i just hook it up to obd adapter and plug 12volts to it and start flash and far beyond half way it stop and start complaint that voltage wrong or com port wrong or usb cable not connect and if i try again it start flash and stops right away with same story voltage wrong ... should i try to connect to car and try again or is going to gone autocom

Install old version 2011.1 and flash back old firmware... it should work. Maybe your autocom version can't be upgraded to 2011.3...not all of them can...

[viki300]

ok i can try that thanks a lot

[flavyus1987]

Try to start engine to have stable 12V.

[autocargo]

ok i can try that thanks a lot

...and tell us if worked alright

[viki300]

Hi and ok i connect autocom to car and flashed 2011.3 firmware and everything works now ok i didnt try that old firmware cos new worked ok

[mick711]

Hi and ok i connect autocom to car and flashed 2011.3 firmware and everything works now ok i didnt try that old firmware cos new worked ok

So you don't have 12 volt when you try first time .

[meteor80]

Does someone have solution for repair unit that doesn't connect with airbags in Opel Astra H?
All brands works fine but not astra H.