technomate tm600/500 sound problem

**reddevilyfe** · 30th May, 2011, 05:56 PM

I have a technomate tm 600 and it has been working for a year now without any problems and recently on all the Disney channels and s*y movies the sound has disappeared . I hv seatched all over the Internet and could not find any solutions . disable was on 4:3 is disabled and ac3 default output is enabled, I hv tried changing these but there is no effect. the box is connected through a scart straight into my 50" flatscreen tv. thank you in advance

**bj1** · 30th May, 2011, 06:18 PM

have you tried rescanning 28east it worked for me when i had the same problem

**reddevilyfe** · 30th May, 2011, 06:22 PM

I rescanned all the transponders, but no luck . I'm pretty sure that it is to do with the settings or it may be a technical fault

thankyou for your quick reply

too bad we lost

**bj1** · 30th May, 2011, 06:29 PM

have you got a phono lead ? try that ......did you buy your box preloaded?

**reddevilyfe** · 30th May, 2011, 06:47 PM

yes, my box came preloded , I pay per month to a guy, I managed to get the pin code from the guy and he taught me how to scan for transponders, I am connected by a scart and it was working fine until I changed the setting not to send wss signal when 4:3 ,the sound stopped working then . I hv tried reverting the settings back and fourth but it still hasn't worked.

**bj1** · 30th May, 2011, 06:54 PM

have you tried switching between rgb and pal

**freck** · 30th May, 2011, 06:56 PM

Try pressing the "audio" button on your remote and change the audio setting to English.
Freck

**reddevilyfe** · 30th May, 2011, 07:07 PM

rgb and pal change the picture colour not the sound, as for the audio button I am busy doing another transponder scan I will get back to you with my reply as soon as I'm done

**bj1** · 30th May, 2011, 07:16 PM

you may have to update your image using your lan buton...software update latest image i have had this problem before and a rescan solved it....could be a dodgey scart lead? good luck BJ1