VAG K+CAN USB Help

**ominimicu** · 7th June, 2011, 11:03 PM

Guys, i hve this 1.4 Vag k Can commander(china). it always worked fine.

Today i tried to use it..and detects it as Ross Tech Direct USB interface. as a USB port.

I need it back to LPT and COM ports section under device manager, so i can adjust the COM settings to match the software.

What hs happened to it? why now it detects it as USB? instead of COM? i tried reinstalling it..and various FTDi drivers...no luck

**emanuel2010** · 8th June, 2011, 01:03 PM

try another interface on the same laptop.

**ominimicu** · 8th June, 2011, 09:33 PM

i tried on 5 PCs, i managed to reprogram the Eeprom thanks to my old friend ipejasinovic, i ll check tomorrow and let everyone else know.

thanks ipejasinovic

**ominimicu** · 9th June, 2011, 08:22 PM

Done, perfect works 100%

**Djice** · 18th November, 2012, 05:56 PM

how you get rewrite the eeprom, you got removed from pcb?

**zeljolaki** · 18th November, 2012, 11:04 PM

Originally Posted by Djice

how you get rewrite the eeprom, you got removed from pcb?

No, dont need ,MProg is your frend: FTDI Utilities

**ominimicu** · 19th November, 2012, 12:38 AM

downloaded FT prog from there, and used a backup template. i cant seem to find it right now. But it can be done in 5 min with Ft prog, no need to desolder or open anything