Latest firmware for openbox S9 / S10

**rkabishi** · 21st July, 2011, 02:03 PM

Hi guys,I have got a s10 on which i have laoded new firmware,channel list and cccam .cfg,been watching for it for couple of weeks now ,no problem what so ever.i requested some ccline for test yesterday and today those cline were active then i started experiencing boot problem.i deleted all the channels ,did a factory reset,and reupload some other channels and the same ccline received yesterday,started watcing for couples of hours and the reboot started again.any idea what is wrong?

**quinnyp** · 21st July, 2011, 03:32 PM

tryed the colour buttons still will not come off standby ,its a s9 box i have ,its got to be the firmware

**kidbrush** · 21st July, 2011, 09:41 PM

Turn your box off and back on, with the switch at the back of your box, then try the standby fix.

**brunocleite** · 22nd July, 2011, 05:41 AM

The firmware is working OK in a S10 BOX. Tested MKV files and the media player is working fine. But i noticed that it doesn`t works with subtitles. Is there any way to show subtitles in the media player?

**quinnyp** · 22nd July, 2011, 08:20 AM

Originally Posted by kidbrush

Turn your box off and back on, with the switch at the back of your box, then try the standby fix.

done that still dosnt work put the latest firmware off here on tryed some old ones still no joy,but some firmwares it will go into standby but wont come out.

**bounder1** · 24th July, 2011, 10:55 PM

hi guys used this upgrade for s9 and it boots up really quick now,only fault is when flicking through channels with remote the box keeps freezing,having to reboot it from the back,quite annoying

**yugo73** · 27th July, 2011, 12:01 AM

I tried the standy fix t with no luck. any idea?
I pressed all the buttons sequentially shoudl I hold any of them?

**kidbrush** · 27th July, 2011, 09:21 AM

no just a tap of each button will do, have a few goes at it, it took me a few goes, then it worked, maybe i was holding the buttons down too long, so try tapping them..turn the box off and back on for each go..good luck!

**yugo73** · 27th July, 2011, 01:40 PM

Indeed it worked.
Just a tip for who will do it in the future, no need to press the standby button until the info screen doesn't change adding two lines at the bottom. At least you save the hassle of turning off and on from the back each time.

**custard** · 30th July, 2011, 12:16 AM

anyone been able to get sky uk working on firmware dated 23/6/11 using an official subscription? i cant seem to decrpt subscribed channels. i have entered the boxkey in the videoguard2 section but this does not help.

i can decrypt sky uk using factory firmware dated for oct 2010.

**dogmalogy** · 30th July, 2011, 09:47 AM

Newbie, is there a dummy manual for this?

**darvash** · 1st August, 2011, 04:23 PM

Originally Posted by dogmalogy

Newbie, is there a dummy manual for this?

You can get it her

**darvash** · 9th August, 2011, 05:32 PM

New software Europe version dated 08/08/2011 for Sky/openbox S9 and S10

Software is interchangeable so it can be used both for skybox and openbox. It is the same box with different look

**baz007** · 9th August, 2011, 07:29 PM

Originally Posted by darvash

New software Europe version dated 08/08/2011 for Sky/openbox S9 and S10

Software is interchangeable so it can be used both for skybox and openbox. It is the same box with different look

Thanks for letting us know, what are the changes in this new firmware?