XPROG cummunication error

**joaopereira** · 13th July, 2011, 09:15 PM

please help me
my xprog dont work
don?t have authorizations blank
and cummunication error

help me

**grinovsky** · 13th July, 2011, 10:08 PM

set your port ,change usb cable,or try it with DB9 cable

**joaopereira** · 14th July, 2011, 06:19 AM

hi
after the update xprog
cummunication error
I got blank authorizations

**meteor80** · 14th July, 2011, 07:06 AM

X-prog from china or original?

**gtmech** · 14th July, 2011, 10:22 AM

Originally Posted by meteor80

X-prog from china or original?

im guessing clone

**joaopereira** · 14th July, 2011, 10:29 AM

X-prog from china clone

**gtmech** · 14th July, 2011, 12:10 PM

Originally Posted by joaopereira

X-prog from china clone

correct me if im wrong buddy but the chinese ask you NOT to update them because this is what can happen as they arent the original. Just buy another one as I dont think you have much chance of recovering this one now

**meteor80** · 14th July, 2011, 12:27 PM

Bye bye- xprog

Never update clones.
Look at the picture.

**Zmann** · 14th July, 2011, 12:56 PM

You might have some little chance left, tell us as much as possible about your Xprog and what you have done. Remember that in the mean time of sw upgrading from v4.5 to v5.0 there are many people who were running v4.5 and successfully upgrade to v5.0 I think bram380 is the first person, mine too. just roughly remember that in the beginning of upgrade process all authorisations disappear but recover when things complete. So tell more what you have done? Or done by Xprog box

Your answer may be in this thread but on many pages back, research it.

Originally Posted by joaopereira

please help me
my xprog dont work
don?t have authorizations blank
and cummunication error

help me

**joaopereira** · 14th July, 2011, 07:29 PM

My xprog-m is clone china obdfactory

5.0 software

upgraded to 5.3 because Micronas

when I update the firmware 1.5 and was blocked with commitments all in white

**forumams** · 14th July, 2011, 07:39 PM

As I see, your attachment shows that you use V5.0 not 5.3

Originally Posted by joaopereira

My xprog-m is clone china obdfactory

5.0 software

upgraded to 5.3 because Micronas

when I update the firmware 1.5 and was blocked with commitments all in white

**polat** · 15th July, 2011, 06:59 AM

hi my clone xprog m 5.0 hc912 and hc912s

read dump ok but verify error

WHAT IS THE PROBLEM ?

**Holtek** · 15th July, 2011, 09:35 AM

READ THIS:
http://www.digital-kaos.co.uk/forums...6/#post1175526

**Zmann** · 15th July, 2011, 10:48 AM

Now, what I can see your possibilities
1. prepare 200 something Euro and then contact Xprog box guy.
2. buy a new one.
3. Or, with a help from a few members here with a v4.5 firmware dump if they allow you to have it, but this job needs your another programmer to accomplish.

Originally Posted by joaopereira

My xprog-m is clone china obdfactory

5.0 software

upgraded to 5.3 because Micronas

when I update the firmware 1.5 and was blocked with commitments all in white