BDM CONNECTIONS FOR XPROGM

**darwins** · 12th February, 2013, 06:43 PM

There must be a way to connect to pcb and read ST10 flash with Xprog

I might have to cut a unit up and experiment, but before I do can anyone help?

UPDATE:

I cut up a damaged unit. Using Xprog is not going to work unless the pcb is removed from metal back for connections and this is going to destroy the unit !

I can confirm ST10 flasher I made works 100% unlike any other clone tool i have tried. A full read or write takes approx 10 mins
verify works 100% either by single bank change or full rewrite.

**large12390** · 28th February, 2013, 05:46 PM

hello all
please need help to read this ecu with cpu st 10f275
ecu is kefico by licencs bosch to hyunday cars
i have bdm and x prog m
photo in attch
thanks for help

**carmelasse** · 11th March, 2013, 06:34 PM

Originally Posted by MS1

Hi
I have read many posts on DK and cannot find any reference about BDM connection for this ECU 2003 BMW 745IL N62 engine. BOSCH ECU 0261209002 0 261 209 002
BMW # 7 523 523 7523523
I have a BDM programmer and XPROG-M
I circle two possible BDM connections.
any help and sugestions appriciated.
you can download more high resolution pictures from my link

https://rapidshare.com/files/4290968..._ME9.2_BDM.rar

I also have a problem with the ECU and BDM reading.
This is not a standard connector BOSCH.
Does anyone have a way to read the ECU with BDM?

Regards

**koncimobil** · 12th March, 2013, 09:59 AM

Use xprog standard BDM Bosch ECU.
ECU need supply 12VDC.

**dikseln** · 15th March, 2013, 10:26 PM

Right,
that have 12 test point, so, is not standard BDM with 14 point.
First, you need to find GND point and after another point in order of BDM in Bosch ECU's.

**mitch2** · 20th March, 2013, 05:11 PM

hi i read ok ,ford delphi ecu with xprog .is a mpc555 but i can erase or write xprog show that :see picture.
any ideas?
thanks

**kautuvera** · 20th March, 2013, 11:04 PM

hello all
please need help to read this Audi tt 2005 with cpu mask : 3K91D
i have Xprog M
photo in attach
thanks for help

**lupu_sandu** · 20th March, 2013, 11:08 PM

Good luck (but this topic is not for dashboard):

**igorr** · 21st March, 2013, 12:07 PM

Qwestion about sid202 I can read external flash 28Fxx and external eeprom 95xx with x prog,but when I want to read MPC I get error mesage configuration not for MPC.
How to read MPC so that I can clone this ecu????

**elmassioui** · 29th March, 2013, 12:30 AM

Hi all dk friends,i need pinout for ecu 206 hdi 1.4 edc16c3.THANK YOU

**mitch2** · 2nd April, 2013, 04:10 PM

i?ve sought the connections from broken ecu and st 10f280 datasheet.
i cann?t test it but must be works

IAW4TV.JC xprog dk.jpg

**gselectric** · 28th May, 2013, 07:32 AM

c3 smd capacitor

**gselectric** · 28th May, 2013, 07:47 AM

c3 smd capacitor

**gixxer** · 7th June, 2013, 06:35 AM

Hello
I test but nothing "device is silent Timeout error"
How to read?
Thx

**gixxer** · 7th June, 2013, 07:59 PM

IAW4TV Xprog read:
I get a png that need to use external power supply and remove this resistor! (Before you switch on power supply, you must ground pol.4 pin!)
Thanks to nemena , dasboard3 and mitch2!

I upload full info in zip.