J2534 ToolBox software

**boxsport** · 31st October, 2020, 03:40 AM

Originally Posted by aef

Code:

Windows Registry Editor Version 5.00


[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\PassThruSupport.04.04\Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM]
"Name"="OpenPort 2.0 J2534 ISO/CAN/VPW/PWM"
"Vendor"="Tactrix Inc."
"ConfigApplication"=""
"DeviceId"=dword:00000000
"CAN"=dword:00000001
"ISO9141"=dword:00000001
"ISO9141_CH1"=dword:00000001
"ISO9141_CH2"=dword:00000001
"ISO9141_CH3"=dword:00000001
"ISO14230"=dword:00000001
"ISO14230_CH1"=dword:00000001
"ISO14230_CH2"=dword:00000001
"ISO14230_CH3"=dword:00000001
"ISO15765"=dword:00000001
"J1850PWM"=dword:00000000
"J1850VPW"=dword:00000000
"FunctionLibrary"="C:\\Windows\\SysWOW64\\op20pt32.dll"

Sorry for the late reply mate, but the code you send does not work for J2534 Toolbox (in order to have tactrix working)...
I think it might be because of the version, sind i'm trying to use J2534 toolbox 3.
Need to see if i can find version 2 that seems to work better (or at least doesnt ask for "login credentials. Already tried with my tactrix serial, and still no work)...

**boxsport** · 29th November, 2020, 12:32 AM

Does anyone have Toolbox 2 complete version that can share? i need to try to make this work but i need version 2. (version 3 seems to have some differences and doesn´t work for me)

Thanks

**Ejaik** · 14th June, 2021, 07:12 PM

Good day everyone.
I have this allscanner vxdiag j2534 interface: https://www.vxdiagshop.com/wholesale...da-2-in-1.html.
I want to use it with J2534 toolbox software for Chrysler Vehicles. But I only find J2534 ToolBox3 in drewtech website. But this j2534 toolbox3 can't work with chinese made j2534 even if you modify Windows registry correctly.
So I download need a link(Mega, Media fire ect) for old version J2534 TOOLBOX 1 and the Driver link also.
I will greatly appreciate anyone's help.

**12manux** · 14th July, 2021, 12:31 PM

up ....
anyone managed to get it working ???

**SubnetMask** · 11th May, 2022, 02:08 AM

For what it may be worth... I found an old version on informer.com, listed as v1.3, that upon installing, the splash screen shows 'J2534Toolbox2' and the help > About shows 1.3.4.0, and on a fresh install of Windows 7 with no updates, seems to work as expected with the required reg entries for your hardware of choice. In my case, a MDI2. On a patched version of Windows 7, I got errors indicating 'the app was unable to load a required virtual machine component', which seem to possibly be related to some Windows updates. I have at least some measure of confidence that the file is legit as the current version (apparently) downloaded from informer.com was a hash match to the one I downloaded from drewtech directly. Nonetheless, I installed it on an air gapped machine just in case.

**Tune EMS** · 1st November, 2023, 09:32 PM

did i do this right? i downloaded the Cardaq plus drivers. i opened the reg files, and copied the cardaq plus info into the sm2 reg file. when i open tool box with my sm2 plugged in, it asked for a serial number

i tried 123321 and it did not work. not sure how to modifiy the reg on cantiecar to try it out

right.jpg