MAGPRO2 CL*N TEST OK IN VEHICLES

**psico** · 31st August, 2011, 11:13 AM

Hi

I thought about going by making a list of vehicles we are doing and if things go wrong, can be divided into the euro clone and Chinese clone.

I personally I have a euro clone.

ALFA GT 1900 16V 150CV---------EDC16+ R/W OK
AUDI A4 2.0TDI 140CV -----------EDC16+U31 R/W OK
FORD FOCUS 1.8 TDCI 115CV-----SIEMENS SID202 R/W OK
OPEL ZAFIRA 1.9 CDTI 150CV-----EDC16+ CAN BUS R/W OK
OPEL ASTRA 2.0 T 190CV----ME 1.5.5 R/W OK
PEUGEOT 207 1.4 HDI 68CV----EDC16+ CAN R/W OK
PEUGEOT 207 1.4 8V 75CV------JHONSON VALEO CAN R/W OK
PEUGEOT 307 2.0HDI 110CV----EDC15C2 R OK W BLOCK no problem with slow speed, i selected max.
RENAULT MEG 1.5 DCI 82CV----DELPHI K R/W NO
SEAT LEON 1.9 TDI 105CV----ECD16+U34 CAN R/W OK
SKODA OCTAVIA 1.9TDI 105----EDC16U R/W OK
VW GOLF 1.9 TDI 105----EDC16+ R/W OK
Clon chinese VW GOLF R32 250CV----ME7.1.1CAN R/W BUT NO START.........
MERCEDES VITO 110CDI ----EDC15C0 R/W OK
CITROEN PICASSO 2.0 HDI 2007 SIEMENS SID803A READ OK
PEUGEOT 307 HDI SIEMENS SID801 WRITE OK
ALFA BRERA 2.4 JTDM BOSCH EDC16 C39 READ AND WRITE OK------------read 45 min
MB ML 3.0 2009 224CV EDC16+ READ AND WRITE OK , for no problems fans engine off .
FIAT DUCATO 2.0 SIEMENS SID803 CAN READ WRITE NO PROBLEMS READ 2MG.

With the collaboration of all, we can avoid many headaches.

i always slow speed for no problems.

With 5.5 update

Read and write mazda 1.6 group psa , read and write ok.

**bazare** · 31st August, 2011, 12:00 PM

Or you can buy the original and avoid ALL headaches and also have support! Plus the new version v5.0 don't work with clones.

**psico** · 31st August, 2011, 02:16 PM

5.0 in clone....time ..time friend,

I do not belittle people who have the original, I do not work on this, just a hobby.
If reprogramming my job I would not hesitate in buying a Galletto 2.

My intention is that people who are starting or not your job does not have this problem or has the minimum.

Magpro2 and x17 is good good machine and no more cost for the coverage you have.

**psico** · 2nd September, 2011, 08:23 AM

FORD FOCUS CMAX 1.8 16V TDCI SIEMENS SID202A R OK

**bambula tuner** · 29th October, 2011, 11:38 PM

Hello at all (o:

I have read & write the fallow ECUs

-Fiat Stilo 1.6 16V Marelli 5NF
-Fiat Ducato 2.3 & 2.8 JTD EDC 15
-Fiat Ducato 2.3 JTD EDC16C39
-Fiat Panda 1.2 8v Marelli 5af
-Fiat Croma FL 2009 2.4 JTD EDC16C39
-Fiat Doblo 1.9 JTD EDC16C39
-Fiat Bravo 1.4 & Grande Punto Abarth SS 1.4tjet 180 HP -Bosch ME7.9.10 READ IN Boot mode writing via OBD but -works only with fast Speed Option
Alfa GT 2.0 JTS Bosch MED7.1.1 Read & Write in Boot Mode
-Alfa 159 EDC16C39 2.4 JTD & 1.9 JTD 6 diffrent Cars

- Golf 5 R32 Bosch Me7.1.1. read & write on CAN via OBD

The only one ECU Bosch EDC16U from a VW Transporter T5 2.5 TDI i cant read & write via OBD. with Galletto i can read but no write this ECU any Idea?

**Mario4044** · 29th October, 2011, 11:42 PM

DO with BDM100

**bambula tuner** · 29th October, 2011, 11:59 PM

i have a bdm 100 Clone but i hear,that somes has wrong connection inside. Do you now how can i check this ?

thanks for the quickly reply

**serguei** · 30th October, 2011, 07:41 AM

I read and write clone MPPS 5.0 via OBD: T5 1.9TDI BRS 2008 and T5 2.5TDI BNZ 2006.

**psico** · 30th October, 2011, 10:41 AM

T5 is best read and write bdm.

**jejevfr** · 30th October, 2011, 01:56 PM

peugeot 407 2.0 136cv , dcm 3.4 OK
picasso 2.0 hdi 90cv edc15 OK
seat leon 150cv tdi edc15 OK

test recovery edc15p tdi 100 OK

**serguei** · 30th October, 2011, 02:10 PM

VW Touran 2.0 TDI BMM EDC16U34 2007 read OK.

**sukkamotton** · 1st November, 2011, 06:47 AM

hello whats recomended for USA makes ford dodge and gm . what interface and what software any help will be apreciate

**psico** · 1st November, 2011, 04:41 PM

Hi ,for ford good interface is powergate .

**psico** · 25th December, 2011, 11:39 PM

ANYONE has read and written a sid803a siemens in can of citroen hdi?

**chris_e36_328** · 26th December, 2011, 12:07 AM

Posted in other thread but no replies there..
Hi, got my MagPro2 delivered a few days back. A few questions for those more familiar with it:

1. is it safe to use the clone with v2.42a even though it was delivered with 4.1? I am annoyed with the fact I have to request key files from my supplier each time I change the laptop. How does 2.42 goes around this? has anyone got keygen for the 4.1?

2. My interface came in a black alu case, but looking at the pictures the PCB seems same as the one in blue alu listed in this thread ealrier on. To be frank I see no differences between these other than solering quality. Any one can elaborate?

3. Can anyone onfirm whether the Kess V1 clone HW is any better, stable or reliable than the MagPro2? There seem to be slight differences between these two.

4. re 803A: What is your experience with this SID? Reading/writing? Anyone has any connectivity issues with Kess v1 or MagPro or are these safe to use on the 803 and 803A?