Open PLI Oscam & CCcam UK Ready EPG Mapped Backup

**fay28** · 28th December, 2011, 07:12 PM

Originally Posted by visco

This is what you need to type.
for example..http://192.168.0.9:8888/
it worked for me,please note you must use the ip of your recieve.r

my box ip is 10.x.x.x and it does not work with

http://10.x.x.x:8888/

**azzakidiwala** · 3rd January, 2012, 06:55 PM

Hi i really want this image but cannot connect remotely few problems :/ is it possible i can get a copy of a .img?

Thanks Azza

**azzakidiwala** · 3rd January, 2012, 07:45 PM

I flash mine with the file from OpenPli's website. and when i tried to do this with a remote access it patches through and does everything on the computer but nothing happens to the box :S? Can someone help. Thanks

**azzakidiwala** · 3rd January, 2012, 09:37 PM

New problem
ok updated firmware on dm500 with the backup.img copy (Thanks for that btw) all up and running with DreamUP.
OK plug it in ethernet port and stuff. But non of the channels work? SO CONFUSED :'(

Someone please help me! Newbie and want to get my head around this!

Thanks Azza

**fay28** · 3rd January, 2012, 11:45 PM

Originally Posted by fay28

my box ip is 10.x.x.x and it does not work with

http://10.x.x.x:8888/

im still stuck on this folks can anyone help?

**azzakidiwala** · 4th January, 2012, 12:18 AM

@fay28 what i did is input my ip address and press enter.

Http://192.168.0.0:8888/

Just put that in the address bar simple!
so you see my ip address is 192.168.0.0

(Dont worry not my actual ip

)

**fay28** · 4th January, 2012, 11:18 PM

tried that

i get

Internet Explorer cannot display the webpage

**rricky** · 5th January, 2012, 02:01 PM

Hi guys been using this image for a few months and everything 100 %. Now when i remove a few users from oscam.user they still seem to show in the web info as user not found or user disconnected.

Any help as to what i am doing wrong.

Thanks in advance

**rricky** · 6th January, 2012, 08:08 PM

Any help guys about users removed showing in web info as anonymous disconnected from ip addy or the persons username not found.

I thought when you remove a user they shouldn't be able to try and connect.

**DigitalDaz** · 7th January, 2012, 07:58 PM

I flashed this image, really liked the look of it but as someone else posted above, I could hardly receive any channels. Even a scan picked up very few.

I'm using a genuine DM500S

**garry1312** · 23rd January, 2012, 02:28 PM

Originally Posted by rricky

Any help guys about users removed showing in web info as anonymous disconnected from ip addy or the persons username not found.

I thought when you remove a user they shouldn't be able to try and connect.

Although they can no longer access your card while the line is still in there receiver it will try and connect to the server. This still causes unwanted traffic but they cannot view your card.

Advice them to remove the line from there receiver.

**maclaren786** · 23rd January, 2012, 09:33 PM

are the pli images are faster than nabilo sat and stable?????

**garry1312** · 23rd January, 2012, 11:52 PM

Originally Posted by maclaren786

are the pli images are faster than nabilo sat and stable?????

Not sure mate but when I used a 500s I found that Pli images were extremely stable, better epg support and never had any issues with speed.

**satshop77** · 29th January, 2012, 04:32 PM

hi is there something im missing here? i have flashed the box as i have a hundred time and installed the cccam. inserted the card and its not recognised by the internal reader. what am i missing?
what should i be looking for?

thanks