Go to dddl diagnostics window.At the bottom of the list it will say turbocharger actuator adjuster routine.
hi, well here is the procediment to adjust the turbo actuator, i think you need DRS to reprograming the ecm to make adjustment.......
2009-08-28_turbo ddec5 adjustment.pdf
Elfer (22nd November, 2013), RICARDO ORTIZ (7th September, 2013)
thank you guys for responds...i dont have test ecm and dont want to re-flash original one. there is easy way to adjust turbo. i have been told this instruction.
1. warm up engine to 185-190 f
2. connect dddl and go to diagnostic window.
3. accelerate engine rpm to 1000 and hold it
4.egr valve must be closed 11 %, VGT Vanes Actuator 67 %, Boost Pressure 19-20 kPa. Dont pay attention on turbo speed.
5.if Boost Pressure is less or more then 19-20kpa, turn actuator's rod to get proper boost pressure.
Some body know about this ? want to make sure i am doing right.
Last edited by a13xxc; 11th September, 2011 at 05:29 PM.
I did adjustment this way (see above) yesterday..it works...drove loaded truck uphills and in the city. It runs perfect.
People this is the easy way to adjust turbo...
I adjusted differnt ways but this seems simple enough.Will try it friend.
Yes, many ways to adjust VGT actuator,
what the exact ?
Elfer (22nd November, 2013), juan79 (23rd November, 2014), RICARDO ORTIZ (7th September, 2013)
We used a regulator to set the actuator.I think the procedure is in dd service manual.
Bookmarks