DAS installation guide [Updated for 2011]

**zolookas** · 8th September, 2011, 07:09 AM

This is a guide for installing DAS 07.2011 (and probably 05.2011) software on any computer running Windows XP SP3

Password: Qutomotive

Big thanks goes to Impactops, Qrius and strda50es for solutions, ideas and testing!

If you have any questions please don't PM me.

**strda50es** · 8th September, 2011, 07:33 AM

Your contribution is invaluable mate.
I hope we will not see this guide for sale over the net with various logos from various sellers.
Wish you all the best.

**selefkos** · 8th September, 2011, 07:33 PM

respect guys,you really did a brilliant job!!!

thanks to Mr.zolookas, Mr Ipactops,Mr Qrius and Mr.strda50er !!!

Great job M8s!!!

regards
Selefkos

Thanks Mr. PremierD ;-)

**impactops** · 9th September, 2011, 02:46 AM

@COCOH

Your boss has ordered you to do the rounds and post propaganda?

I will continously expose you for the fraud you are and the scum bags at JC cleaning services.If these actions are yours alone then i suggest they cut you loose cause you will bring them down with you.

...and to think you even thanked this post!

**cocoh** · 9th September, 2011, 05:51 AM

Originally Posted by impactops

@COCOH

Your boss has ordered you to do the rounds and post propaganda?

I will continously expose you for the fraud you are and the scum bags at JC cleaning services.If these actions are yours alone then i suggest they cut you loose cause you will bring them down with you.

...and to think you even thanked this post!

@Impactops..

READ again that post...

@Impactops... YOU ARE A MAN WHICH looking for causing FIGHTS!!!

STOP STOP !!! TO BE THIS MAN!!!!

You don't know NOTHING about me...

I will continously expose you for the fraud you are and the scum bags at JC cleaning services.If these actions are yours alone then i suggest they cut you loose cause you will bring them down with you.

What is this??? Tell me what connection I have with JC??? i want to know this from you... becose YOU DON'T KNOW NOTHING...

WAKE UP... on REAL WORLD!!!! and STOP DREAMING!!!!

maybe ADMINISTRATION of this forum.. they will told you to STOP HARASS PEOPLE!!!

about errore.. was to teste 07.2011>07.2011.. then i made it NEW install WITHOUT ERRORE!!

beste regards...

**impactops** · 9th September, 2011, 08:05 AM

@Cocoh

There the fact's cocoh that's the problem, I don't need to read the post again cause the evidence is there right in front of you regardless whether you have removed the original post or not.You come on you gloat about the fact that you have it working, you don't mention or explain to members how you got it working.You have other members complaining about the fact you have sold them solutions that don't work and are upset about it.You thank this thread for providing the solution while trying to discredit it on others forum(s).You have relentlessly posted sarcastic comments when MB solutions are published.You have referenced your buddies across the road as to what impact a solution may have on their sales.One can even argue that your actions could be considered harassment within themselves. Everybody knows what kind of propaganda has taken place in the past and you still seem to be trying to continue that trend.I'm not talking about one incident either, even if you initially made a mistake then why didn't you remove the post realising later that it works?These are all typical excuses from those who wish to deceive, manipulate and distort the truth.

Now, the same technique was used to try to discredit universal developer keys when they were first published here on DK and ended up being sold in less than 24hours of being posted by the same people that were discrediting them.

If you want to help members here then do so, otherwise i will be pointing any little scam you get up to even if it gets me banned

Regards
Impactops

**avelest** · 9th September, 2011, 07:39 PM

Hey guys, testing on 7-11 and looking as sweet as my wife!
but i noticed one thing, i messed up because i had forgotten that
xentry does not install automatically after the das and went ahead and installed the das for a second time, it gave me an error similar to the x8xxx type.

But then i re-installed it again (clean this time) and there was no error. does this mean that for each time i want to do a upgrade or something, i need to clean my hard disk completely?

and a quick question regarding the hotfixes that pop out at the end of the install, should i install these? or should i just cancel them???

anyhow, once again thanks so much for everything guys, you seriously got me out of a black hole, with constant nightmares of supposed "working" solutions.
(yes that is directed to the sellers out there)

Peace!

**strda50es** · 9th September, 2011, 08:26 PM

Originally Posted by avelest

Hey guys, testing on 7-11 and looking as sweet as my wife!
but i noticed one thing, i messed up because i had forgotten that
xentry does not install automatically after the das and went ahead and installed the das for a second time, it gave me an error similar to the x8xxx type.

But then i re-installed it again (clean this time) and there was no error. does this mean that for each time i want to do a upgrade or something, i need to clean my hard disk completely?

and a quick question regarding the hotfixes that pop out at the end of the install, should i install these? or should i just cancel them???

anyhow, once again thanks so much for everything guys, you seriously got me out of a black hole, with constant nightmares of supposed "working" solutions.
(yes that is directed to the sellers out there)

Peace!

I would say that the "clean installation" procedure is the best way to install it without troubles.
Hotfixes? Yes you can install them with no troubles,even the online updates (i did them all a week before) and i could diagnose with both original and clone multiplexer.
Wish you good luck.
All the best.

**avelest** · 10th September, 2011, 01:42 AM

Update on the status of my install!

i really need some help here! i finished the install, applied the fixes and then when starting xentry i did a diagnosis on a c204 chassis and first it seems that the multiplexer loses the ignition status, also it gives me a incomplete data sector reading in xentry.

please guys im so close! help me out of this hole

im currently doing a reinstall of xentry to see if this fixes the problem, and about the new 872 fix, i noticed that there are a lot of part types in the program
what letter should i use if i have a chinese c3? should i also apply the xentry fix that is there?

Peace!

**DB_member** · 10th September, 2011, 08:10 AM

Originally Posted by teris

I ask again m8's...
How and when we must use all of these, that include into the folder "unattended" ??
After the installation or not??
Thanks again!!!!

Did you read the "Guide.rtf" document? It says when to apply the prepare.bat and when to apply the after installation.bat, that's all (excluding the DAS fixes mentioned in the guide).

Those bat-files take care of using the rest of the data in your installation tools folders.

**impactops** · 10th September, 2011, 05:53 PM

Originally Posted by Gusk

HELLO MATES,
You did excellent work my congratulations,
I have a question, Das is needing a clean installation of Windows or i shall proceed as it is?
Thanks in advance!!

Originally Posted by strda50es

I would say that the "clean installation" procedure is the best way to install it without troubles.
Hotfixes? Yes you can install them with no troubles,even the online updates (i did them all a week before) and i could diagnose with both original and clone multiplexer.
Wish you good luck.
All the best.

That question has already been answered by Strda50es

Regards
Impactops

**DB_member** · 13th September, 2011, 02:49 PM

Originally Posted by elkostv

Hi mate,i was sucesfuly installed xentry 5/2011 without any error ( THX A LOT ),but my question is can i start only DAS like in 03/2011 version becouse when i whant to start only DAS ead DAS can only start from Xentry.

Regards

This question would belong to another thread but have you tried the DAS32R2.exe file from 01/2011? If you don't use your tool on-line, this should fix it (I thought 03/2011 needed the same fix, perhaps I remember incorrectly).

**impactops** · 13th September, 2011, 03:06 PM

@elkostv

You can try this and see if it works

http://www.digital-kaos.co.uk/forums...dalone-207053/

**gcs190** · 13th September, 2011, 06:09 PM

Originally Posted by boonyen

Thanks a lot Mr Zolookas for this guide, I've successfully installed DAS and Xentry 05/2011, but when I try to install WIS standalone 11/2010, it start to countdown 10 second to shutdown and my computer restart after insert the second disk, could someone help me with this, please and thanks in advanced.

See:

http://www.digital-kaos.co.uk/forums...8/#post1248323