Spiderbox 7000HD

**telzan** · 23rd October, 2011, 07:56 PM

Hi I have just purchased the spiderbox 7000HD,from a friend he said he has done a factory reset whatever that is,been tole that i need to install cccams ,patch and free gift ??? got a motorised dish set up to 28.2,so could someone please advice me from factory reset what files and the correct way to put them in the right order to make the box work properly,a big thanks in advance Terry

**marcus1975** · 23rd October, 2011, 08:32 PM

look on spiderbox.tv but be careful what you ask

**alom5** · 23rd October, 2011, 09:03 PM

it won't get you any channels on 28.2e mate. (apart from fta)

you need to have a look at whats available...i think stuff n digitalb is available amongst other things.

if i was you i'd give it back to him.

**gracieboo** · 23rd October, 2011, 09:17 PM

Have to agree with alom. Your friend should have give you a bit of advice with the sale but from what ive gathered on the spiderbox 7000hd 16 east is your best bet to get the most out of the gift patch. but google is your friend also try alsat forum. hope this helps.

**terry l** · 24th October, 2011, 08:46 AM

What firmware have you got on it?..[i think it should be october 10]..go to menu scroll to system information using the arrowed button's in the middle of your remote [left right up down]..find out what it is and come back and tell us!!..At the moment i have to update a spider 9000hd so i could probable talk you through it at the same time..[same way as the 7000]..

regard's

terry.

**dick b** · 24th October, 2011, 01:16 PM

connect box up to dish/tv/broadband.
(1) do factory reset
(2)load patch I"m sending Software only
(3) factory reset again
(4)menu>network press 1111 on h/set,turn network and ethernet on and register
(5)load a channel list or scan (you can use the one I"v sent but it may not suit)
(6)enter your long/lat and display timeouts etc
(7)go to key edit turn ucas & ucas auto roll on
(8)re-set key data and load softcam I"m sending.

any probs just ask there is still a lot of channels open on these boxes on ethernet as well as via ucas/softcam as said digitalb is the most stable on ethernet but stuff on 0.8 West is pretty good too as well as 13E xxx stuff.STB_DB is the channel list

**genuinealb** · 14th November, 2011, 10:09 PM

Hello,

My Spiderbox was working fine until 2 days ago when all but one digitalb channels stopped working.
I downloaded the latest update and uploaded it into the spiderbox.
I uploaded the channel list which i saved before the factory reset but still not successfull.
Any advice?

Thanks

**mdt** · 14th November, 2011, 10:57 PM

Originally Posted by genuinealb

Hello,

My Spiderbox was working fine until 2 days ago when all but one digitalb channels stopped working.
I downloaded the latest update and uploaded it into the spiderbox.
I uploaded the channel list which i saved before the factory reset but still not successfull.
Any advice?

Thanks

which spiderbox do you have?? regards mdt

**ramjet** · 15th November, 2011, 06:01 AM

Originally Posted by genuinealb

Hello,

My Spiderbox was working fine until 2 days ago when all but one digitalb channels stopped working.
I downloaded the latest update and uploaded it into the spiderbox.
I uploaded the channel list which i saved before the factory reset but still not successfull.
Any advice?

Thanks

16e changed to a new satellite called W3C last week , so rescan your 16e channels

**dick b** · 15th November, 2011, 03:26 PM

Originally Posted by genuinealb

Hello,

My Spiderbox was working fine until 2 days ago when all but one digitalb channels stopped working.
I downloaded the latest update and uploaded it into the spiderbox.
I uploaded the channel list which i saved before the factory reset but still not successfull.
Any advice?

Thanks

your channel list wont have the new digitalb TPS which are,
10.762,10.803 & 10.845 all H and 27500.tring is still 11.283V 27500 make sure your dish alignment is ok as sat is still on the move and you cant alter the sat position in the box from 16E without problems.

**kismetkaos** · 20th November, 2011, 08:33 PM

is it possible for me to download a softcam for my spiderbox 7000? if so where can i download this? and do i extract the files to my PC first before transferring them on to my USB!