X5 2008 E71

[ivanrpm]

Hi guys, I need to change mls on this car but offcourse in all units as necesary because the client will go to the dealer to check it, so the dash, cas and what else, if someone has a pdf of this car I apreciate, thanks!

Regards

[markony79]

Hi guys, I need to change mls on this car but offcourse in all units as necesary because the client will go to the dealer to check it, so the dash, cas and what else, if someone has a pdf of this car I apreciate, thanks!

Regards

Do only this and errsed the error code,
check the service intevall!!!
not more then 60000km,
errased the -vehicle check- only
just particle filter can be more then 120000km, if the car is under 80000km

this will be enough for BMW service
my working on this car is never have problem in BMW service

[ivanrpm]

Hi after I change mls the car is starting good, mls ok but the remote control does not work, any advise?

[vageric]

Hi after I change mls the car is starting good, mls ok but the remote control does not work, any advise?

think dump from cas is damage/corrupt.

[ivanrpm]

think dump from cas is damage/corrupt.

I have the original dump, can you repair it if it is wrong?
Do you think if we restablish the data the remote control works again? Or there is something else I can do with original scantool to program it without program cas again? What do you think about it?

Regards

[vageric]

i would said reinstall the original cas dump and see if remote is working again.
but i think speedosoft can help you better than i can in this case.

[Speedosoft]

Hi after I change mls the car is starting good, mls ok but the remote control does not work, any advise?

Can you lock/unlock the doors from the button on the dash? If that too does not work, look for central locking related blown fuses in the interior fuse holder. They're usually 15A (typical problem on E90 but very rare on the E71). You can also disconnect the battery, to rule out any CAN disruption involving the KBM module.
If all the above is OK then, and like Vageric, you might have a corrupted data somewhere in your MCU.

[ivanrpm]

here are the original file, tell me if is corrupted! 9s12xdp512 black cas3


Thanks