Vag-com 409.1.......... Activation

**Qwerty88** · 24th February, 2022, 12:43 AM

Thanks for all.

**knutdi** · 27th February, 2022, 12:20 PM

Hello, im new user, where can i download vcds lite 1.2 full?

**Stefanoghgh** · 30th March, 2022, 10:45 PM

Ciao sono nuovo

**golf4mk4** · 2nd April, 2022, 11:02 AM

Thanks for share

**Ullalllaaa1988** · 6th April, 2022, 06:57 PM

Thank you! downloaded from post 11 and works great with windows 10 and 409.1 cable!

**drakanaz** · 22nd April, 2022, 03:54 PM

thanks for share

**Tomas003** · 24th April, 2022, 06:31 PM

Thanks for sharing.

Originally Posted by ogo777

here is
vag com 409.1

**Matt123456** · 3rd June, 2022, 09:11 PM

Does anyone have an activated 1.2

**Mario6** · 4th June, 2022, 07:45 AM

Originally Posted by Matt123456

Does anyone have an activated 1.2

Yes.
Read the first page of this topic. Post # 11. And everything will be clear.

**eduaro** · 4th July, 2022, 11:39 PM

Obrigado pelo share, amigo

**eduaro** · 5th July, 2022, 01:34 AM

Originally Posted by Mario6

You better use this. (VCD$ Lite 1.2)

working in windows 10 and 11?

**ginjolite** · 21st July, 2022, 01:58 PM

Hi there. I get the VCDS-Lite from the link. I'll try it and report later. Thanks a lot.

**Amray** · 8th August, 2022, 01:40 AM

Please send me the link. Thank you.

**Amray** · 8th August, 2022, 01:41 AM

Can't download from forum. Please send me the link. Thank you.

**m9g** · 4th September, 2022, 08:07 PM

Hi

Would really appreciate some help please

I have a 2006 Audi A4 B7 2.5TDI Estate. Ive done a bit of research and purchased a VAG-K+CAN full commander cable which i believed the right cable for my car. It came with vag commander 1.4 chinese edition. All drivers in ok and interface found and i can get the system to run the car identification so seems all working fine but i just cant do anything with it, it doesnt read anything else from the drop down menu, ive tried them all. I have tried VCDS Lite and in options chose port3 and interface is found but I then click on the different interfaces to connect to and none of them will connect, says "interface no found".

Researching, i have seen a post from someone else saying same problem and they were recommended to try VAGCOM 409.1 in windows XP which they said worked great. Fired up XP, installed drivers and 409.1. Clicked on options, port3 and interface was found no problem with a good latency of between 1 and 2ms. When i try and connect to all the different interfaces i.e. engine, instrument etc etc it always comes up with "interface not found"

Im out of ideas other than maybe although i thought i needed the VAG-K+CAN cable for my cable maybe i needed the older KKL 409.1 cable?

Any ideas please

Many thanks in advance

M9G