Sorry my Mistake
Try this file and Report :-) Same Pass
Greetings Mario
Try this and report
Mariobozze
Originally Posted by p38
This solution is not good, the car goes into emergency mode. I need a good solution in Winols, here is dmos dcm 3.4
Hello!
Try This File and Report Pass in PM
Greetings Mario
Attached Files
Thank you buddy, I just wanted to EGR off to my file, my file is already Stage 1 and FAP off.
Here you have ori file, look at it :-)
Last edited by p38; 17th March, 2019 at 01:19 AM.
Sorry my Mistake
Try this file and Report :-) Same Pass
Greetings Mario
Hi!
I need Stage2 (new nozzles 0.216) and EGR off to my car VW T4 2.5TDI (ACV, 0281010459, EDC15Vm, 074906018AL SG3906). Thanks.
Hello
Please I need DPF off on my FORD FOUS 2.0 TDCI ST 2015 focus delphi 6.1.zip
Delphi dcm 6.1
tnxxxx
Hello guys,if anyone has time for Stage1,thanks in advance
HW:
SW: 1037389825
VIN nr.: TMBBS61Z982019696
SW ver.:
Spare:
Engine: R4 1,9L ED
HW Ver.:
SW upg.: 03G906021RH 1343
Installation:
Now we have this file with EGR off Try and report
Greetings
p38 (18th March, 2019)
Hi, I have this file of my car.
RENAULT CLIO 3 1.5 dCi 67HP/50KW
DELPHICOMMONBALLDCM1.2
HW: 8200767237
SW: 8201064788
ENGINE: D/K9K 17
I want remap for more power
thank you¡
cześć Potrzebuję kontroli lunchu
hi
Please I need DPF off w212 e220 2012
HW: 6519040001
SW: 6519024200
VIN nr.: WDD2120022A579997
SW ver.:
Spare: 0064461540
Engine:
HW Ver.:
SW upg.: 6519035611
Installation: CRD3-651-WMA4AD1
read kess v2
Hello,
Volvo S60 2005 2.4 93kw EDC16C31.
Please help someone dpf, egr and flap off. The swiftec do it wrong. There is a reduction in performance.
Thanks
Kari
Good morning, I would like to make a good modification with egr off. I have a modified file but I do not like it as there is a lack of power in the low and I think it would be better to modify the whole series map again. I leave my original file. Sorry for my bad translation. Thank you! Regards,
03G906016JD.rar
Hi,
Can you help with more power about 15-20 procent
Clio 3 1,5 dci 63kw,86hp
hw 8200626182
sw 8201059623
Hello.
I have a Xsara Picasso 1.6 HDI 110cv (80kw) without FAP. The ECU is a EDC16C0
Also I have EGR off with blanck plate.
Now I would like if anybody could mod my file to reach 130/140cv and EGR off because I hace some DTC from the blanck plate.
Thanks in advance
PD: The file was read with Kess V2 v5.017
DigiProg III - NEC Programmer - CarProg - Vag-COM - VAG-Tacho - Vag K+Commander - DiagBox - Autocom CDP Plus - Kess V2 - KTAG - FVDI Abrites - OBDProg
Bookmarks