Free tuningfiles - Personalized remap

**juramsat** · 14th August, 2020, 03:01 PM

Hi
I need Stage 1 for Audi A4 1.9TDI Bosch EDC15 038906012AF 0281010197

**Kuciap** · 15th August, 2020, 09:09 AM

Hi.

Can someone check this chip? After chip i have a longer stert engine (must turn ~3 sec)
And on the high rpm appears on the dashboard error " dde" .. Before never have this ..
Can someone do faster popcorn, like on yt videos?

Thanks a looot!!

**Kuciap** · 15th August, 2020, 09:28 AM

Originally Posted by juramsat

Hi
I need Stage 1 for Audi A4 1.9TDI Bosch EDC15 038906012AF 0281010197

Here is your file. Egr off Hc + Lc + stage 1.

Give Thanks and Rep -->Pass pm

**arczi11223** · 15th August, 2020, 10:08 AM

Hi I need lanch control ,antilag and flat shift to ford focus st 2.5 T

**feer** · 15th August, 2020, 12:03 PM

Hi guys, I have been writing for some time but I do not have a dyno, all along the way I have a question how to increase nm and reduce smoke at the same time? I mean the nm gain, recently I was driving 140km focus and I'll tell you that it is pushing hard on the seats, I can't figure it out, what's worse, I can't drag this map through the galetto to see what and how. If anyone wants, my map is here ...

**Momchil93** · 15th August, 2020, 08:34 PM

Hello,
i have a original file from audi a4 b8 2008 year 2.0 tdi 143 hp.
And i have a file from the same car but with stage 1 or 2 .... but when i open it with winOLS it says there is no checksums.
Is there any way to transfer checksums from old file to new one?

Best Regards

**jonas000** · 16th August, 2020, 12:55 AM

Hello,
One friend arrives today and comes with one RS4 B7.

It's possible makes one good stage1 with Pops&bangs and VMAX-OFF?

Best Regards,

Jonas

**Obat100** · 16th August, 2020, 03:03 AM

Witam
Każdy może stroić +/- 35% mój plik z Audi A4 B6 1,9 edc15p
HW: 0281011222
SW: 1037370445
SW wer .: 39S05323
Silnik: 1,9l R4 EDC AG
SW upg .: 038906019LJ 5934

Oryginalny plik w atach.

Z góry dziękuję.

**Obat100** · 16th August, 2020, 03:48 AM

[QUOTE = Obat100; 3934218] Witam
Każdy może stroić +/- 35% mój plik z Audi A4 B6 1,9 edc15p
HW: 0281011222
SW: 1037370445
SW wer.: 39S05323
Silnik: 1,9l R4 EDC AG
SW upg .: 038906019LJ 5934

Oryginalny plik w atach.

Z góry dziękuję. [/ZACYTOWAĆ]

**alesul** · 16th August, 2020, 05:10 AM

Hello Dear fellows please help me with My car Alfa Romeo 159 1.9 JTDm 2006 16v 150hp. Pls disable SWIRL, EGR and DPF (my dpf is phisically out with down pipe) add please add more HP with stage one,km 230,000 and ecu file is read with galetto China clone. Economy fuel I understain it is possible also like an alternative?
Fiat Hardware Number :55205068
Bosch Hardware Number: 0281012144
Bosch Software Number: 1037377871
Bosch Software ID: 3442

ALFA 159 1.9 MJET 16V
Bosch EDC16C39 CF4/EOBD Diesel Injection (1.9, 2.4)
--------------------------------------------------------------

ECU ISO code: FD 86 3D 04 19
FIAT drawing number: 55205068
Hardware number: 0281012144
Hardware version: 00
Software number: 1037377871
Software version: 3442
Homologation number: 93942
ECU programming date: 09/03/2005

**rata nicolae** · 16th August, 2020, 07:40 AM

Hello , my car have 240 hp setup but the map its original, can y have the same map from the 240 hp car, my car its astra h z20ler with 200hp. please
y cannot atach the oem file ?

**yourmate** · 16th August, 2020, 09:41 AM

Hi guys,

could sombody help me out and delete P0113 from this ori, please?
It's a 2010 Mazda MX-5 2.0 Auto
ECU: Denso SH7058
MD5 included in the zip

Many thanks for the help

**DrulisLV** · 16th August, 2020, 11:44 AM

Hey. I need a remap my project 1.9tdi 110hp
I have 0.300 nozzles, 11mm plunge, 4bar map sensor, 60mm intake and fmic intercooler, 89mm downpipe, 63mm exhaust, turbo GT2260V bmw 170kw.
I need 2 bar boost, calibrate map sensor 0281006059, maf off, egr off. 200+ hp

038906012AH-SG 2705 EDC15